Young Guns Saddle for 2008 Harley-Davidson Street Glide / Road Glide

Young Guns Saddle for 2008 Harley-Davidson Street Glide / Road Glide

Help & Info



     

 


 

- Select the checkbox next to all parts you would like added to your cart. Please be sure to select your cover options, if applicable, before clicking the "Add To Cart" button.

 

- If you would like any further help or have any questions please either email or call

 

- Click for Configurator Help

#Conditioner
Saddle Cream®



  • Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application.
    * More Info *


Apparel

Tees, Hats & More




  • We're often asked about tees and such so we caved in and had some Corbin gear made up. This is where you'll * Find It *


Furniture

Barstools & Auto Furniture



  • Ready for a Corbin seat inside your house? Auto styled couches and our classic chrome and leather barstools are a big hit for the man cave!
    * Check 'em Out *

Measurements:
  • Rider Seating: Approx. 12" wide x 18" long
  • Approx. Seat Height: 27"


  • Installation: Corbin's Young Guns uses a new key lock system for installation. We include a bracket with stainless steel latch pin that integrates with a lock mechanism on the Corbin saddle. In the front, the saddle is held down with the traditional tongue into the chassis.

  • This saddle is designed to fit with "crash bars" installed in front of the saddlebags.


  • Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel....   don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?



  • Warning: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.



PleaseNote

Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.


Saddle Warranty

Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).


Fiberglass Warranty

Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
A note about paint color matching, Please Read


Export Sales

USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty and applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.


The Young Guns saddle design keeps a low slammed look appropriate to the Street Glide, yet provides plenty of comfort for you. Our high density Comfort Cell® foam provides resilient comfort and a low seating platform for a slim profile that looks awesome. The shape of the saddle follows the contours of your bike and molds along the crown and profile of the fender. Young Guns tail section is padded and upholstered so it can take passengers for a short distance, but this model is designed primarily as a solo saddle. 

In the front, we've built a seating platform that is concave in shape to fit the contour of your body and provide more square inches of body contact. This gives you excellent comfort despite the low profile design. This saddles is sculpted with a narrow nose for good ground reach while providing support under your thighs in the riding position... a standard of Corbin design. 

Inside, our exclusive Comfort Cell® foam gives you firm support that lasts all day because it doesn't crush down like the soft stock foam. Over time, Comfort Cell® will adapt to your body and provide a personalized fit. Under the foam, our rigid Fibertech basepan fits perfectly to your bike and provides a good foundation to keep the foam shape correct. Corbin basepans ride on rubber bumpers to protect your paint job from scratching. Installation is simple and works on a new key lock system designed by Corbin. 

We use genuine leather in all of our seat models to provide a luxurious ride that breathes with your body. The new 2008 stitch pattern has a leather stripe down the middle surrounded by natural texture black leather. Shown in the images above, is a grey snake stripe and a black ostrich stripe, we also have the option of a smooth black to choose from. With our new separated seating platform, we recommend always using this stitch pattern.

Specs




Unique Technology

The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.




Fibertech™ Basepan

A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more...




Comfort Cell® Foam

The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort!




Ergonomic Shaping

A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.




Patented Manufacturing Technology

Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info




Genuine Leather

We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.


Key Lock Installation

This saddle model uses a new mounting system designed by Corbin to allow installation and removable with a simple key lock. Once the included brackets are installed, the saddle can be removed easily by just inserting and turning the key. Need a Demo ? Just click the button.

Write a review

Note: HTML is not translated!
    Bad           Good

Captcha
  • Views: 118
  • Product Code: HD-FLHX-8-YG
  • Availability: 10
  • £0.00
  • Ex Tax: £0.00

Available Options

Tags: Young Guns Saddle for 2008 Harley-Davidson Street Glide / Road Glide, HD-FLHX-8-YG, 2008 Harley Davidson Road Glide