Two-Piece Saddle System for 2012-2017 Honda NC700 X

Two-Piece Saddle System for 2012-2017 Honda NC700 X

Help & Info




- Select the checkbox next to all parts you would like added to your cart. Please be sure to select your cover options, if applicable, before clicking the "Add To Cart" button.


- If you would like any further help or have any questions please either email or call


- Click for Configurator Help

Saddle Cream®

  • Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application.
    * More Info *


Tees, Hats & More

  • We're often asked about tees and such so we caved in and had some Corbin gear made up. This is where you'll * Find It *


Barstools & Auto Furniture

  • Ready for a Corbin seat inside your house? Auto styled couches and our classic chrome and leather barstools are a big hit for the man cave!
    * Check 'em Out *

  • Rider seating: 14" wide x 13" long x 4" deep
  • Rear area: 12" wide x 11" long
  • Approx seat height: 32.5"

  • Corbin's front seat mounts like stock with a tongue in the front and the two stock bolts at the rear (under the passenger seat).

  • Corbin's rear seat mounts to the stock hinge system with included hardware and latches to the stock Honda key lock for fuel tank access.

  • Our front seat will work with the OEM rear seat, but the OEM front seat will NOT work with the Corbin rear.

  • If you opt for electric heat, we include a wiring pigtail that integrates with the Honda fusebox. NOTE: Only the front seat is available heated on this motorcycle.

  • Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel....   don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?

  • Warning: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.


Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.

Saddle Warranty

Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).

Fiberglass Warranty

Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
A note about paint color matching, Please Read

Export Sales

USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty and applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.

Stylish looks and top notch functionality!

Corbin's rider seat offers improved ergonomics that gives improved weight distribution and a more correct seating posture. This sculpted seating area fits the shape of your body and helps to eliminate hot spots and the centralized pressure you feel from the stock unit. The platform has been neutralized to curb sliding towards the tank under braking which also helps to reduce fatigue. We've also repositioned the rider's seat as the stock position felt crowded to the tank.

Our front seat is designed to work with a coordinated passenger saddle or with the stock unit. When used with the Corbin rear seat, you'll find additional seating room that allows you to push back from the tank a bit. This also allowed us to create a more dished platform and build in some lower back support via the passenger seat. The Corbin rear seat offers a huge improvement over the stock piece with ergonomic design similar to our front saddle. Body contact area has been maximized for more square inches of support and is neutralized to curb sliding. Due to the minimal space available in the tail section and hinge action, we were unable to engineer the removable backrest system into this model.

Both seats are built up with our high density Comfort Cell foam for firm support that remains resilient all day. Our exclusive purpose built foam will break in over time to take on your shape and provide a personalized fit. All this comfort is wrapped up in a package that fits perfectly to the bodywork of the bike for an integrated look and clean visual appearance.

Built up on a Fibertech basepan that molds to every contour of the machine. The Corbin basepan rides on rubber bumpers to protect your paint and provides a rigid foundation to support the carefully designed foam shape. We go to great lengths to assure the basepan is as flat as possible so that odd shapes or bumps won't transmit pressure through the foam to your body. All aspects of the Corbin design are the fruit of more than four decades of seat making experience.

Corbin's Wizards are masters at combining form and function into a saddle that makes you as happy to look at as it does to ride on. On top, we include genuine leather seating in choice of styles for looks from outrageous to stealthy. Shown here, both saddles are pictured with black carbon-fiber leather seating, Asphalt vinyl sides and a Ghost Grey welt for a custom touch. Carbon-Fiber leather lends a nice sporty touch while the Asphalt sides provide contrast.

Front saddle installs like stock with brackets premounted on the seat so it's ready to go right out of the box. The Corbin passenger seat will mount like stock onto the Honda hinge using included hardware. Rear seat latches down just like stock with bracket premounted on the seat.


Unique Technology

The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.

Fibertech™ Basepan

A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more...

Comfort Cell® Foam

The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort!

Ergonomic Shaping

A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.

Patented Manufacturing Technology

Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info

Genuine Leather

We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.

Electric Heat

As an option we can include electric heat in this saddle! This option provides a true bit of luxury for when the temperature starts to drop. Simple to install with major components pre-built into the saddle. Just wire in the included pigtail and you're ready to roll. Click the button at left for complete info...

Write a review

Note: HTML is not translated!
    Bad           Good

  • Views: 816
  • Product Code: H-NC7-F
  • Availability: 10
  • £0.00
  • Ex Tax: £0.00

    Click the "Design It" button to explore. You will be taken to our visual design tool where you can experiment and share it with your friends, add it to your shopping cart or just play around for a bit.

Available Options

Tags: Two-Piece Saddle System for 2012-2017 Honda NC700 X, H-NC7-F, NC 700X