Two Piece saddle for Majesty 400

Two Piece saddle for Majesty 400

Help & Info



     

 


 

- Select the checkbox next to all parts you would like added to your cart. Please be sure to select your cover options, if applicable, before clicking the "Add To Cart" button.

 

- If you would like any further help or have any questions please either email or call

 

- Click for Configurator Help

#Conditioner
Saddle Cream®



  • Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application.
    * More Info *

#02-SB
Standard Ovalbac®



  • Our most popular backrest model is the perfect blend of form and function. The size looks visually appropriate on most every seat yet is large enough to provide good, sculpted support. Works well in either the rider's or passenger's position. The standard Ovalbac is available with a range of finishing plate options to dress up the rear including chrome!
    * More Info *


#297-SB

Standard Backrest



  • The standard Corbin backrest for years! This model is the same size and shape as the Standard Ovalbac above, but without the hole in the middle. Provides plenty of sculpted back support without looking too big on the bike. Works in both the rider or passenger seating area on virtually all Corbin saddle models. This model also has the option of chrome studs if desired.
    * More Info *


#02-L
Large Ovalbac®



  • Like the Standard Ovalbac show above, but with a larger contact area for added support. Works great as a passenger backrest in Dual Touring models. Because of the added width, we do not recommend this model in the front position while carrying a passenger... it may interfere with their legs. Sculpted to provide wide ergonomic support. Offers a variety of finishing plate options to customize the rear (sorry, no chrome).
    * More Info *


#02-T

Tee Ovalbac®



  • This model is specially designed to be used in the large Dual Touring seats (like HD Baggers) or in Master's Type saddles as found on the Goldwings. Sculpted for extended support both vertically and horizontally, but cut away at the bottom to provide clearance for passenger's legs. A variety of finishing plate options are available to customize the rear.
    * More Info *


#02-G

Gunfighter Ovalbac®



  • If you want the functionality of a backrest, but also want the smallest appearance possible, this is the backrest model for you. This one is most often used as a rider's backrest in Gunfighter seat models (thus the name). Includes a variety of finishing plate options for the rear.
    * More Info *


#GB

Gunfighter Backrest®



  • All the functionality of an adjustable backrest, combined with the smallest profile possible. This model is often used as a rider's backrest in Gunfighter seat models just like the #02-G shown above. Includes genuine leather seating and color coordinating options just like our saddles
    * More Info *


#GLOVE-BOX

Glove Box



  • A convenient storage solution that looks great too. Corbin's Glove Box bolts up easily to your #02-S(B) model backrest in place of the rear finishing plate to provide four liters of locking storage. Available in primer or pre-painted. Some color matches are available depending on bike make and model. Comes fully lined too! * More Info *


Apparel

Tees, Hats & More




  • We're often asked about tees and such so we caved in and had some Corbin gear made up. This is where you'll * Find It *


Furniture

Barstools & Auto Furniture



  • Ready for a Corbin seat inside your house? Auto styled couches and our classic chrome and leather barstools are a big hit for the man cave!
    * Check 'em Out *

Measurements:
  • Rider seating: 15.5" wide x 19" long
  • Rider Back support: 8.75"
  • Passenger: 15" wide x 11.5" long
  • Rider Seat height: 28.25"


  • Front saddle installs just like stock reusing the original bolts. Adjustment feature of the front seat remains intact.

  • Base PanRear saddle installs with brackets and hardware included. In order to offer the option of a passenger backrest, we designed a mounting system that would be more sturdy. Simply mount the two included brackets to the bike as shown and secure the rear saddle to them from the sides.

  • Corbin's rear seat does not work with the Yamaha passenger backrest assembly #ABA-5RV42-20-00.


  • Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel....   don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?



  • Warning: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.



PleaseNote

Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.


Saddle Warranty

Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).


Fiberglass Warranty

Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
A note about paint color matching, Please Read


Export Sales

USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty and applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.


The time tested design of the Corbin saddle has been applied to the Yamaha maxi-scooter. Ergonomically shaped seating buckets provide excellent weight dispersion and amazing comfort. We've even built in hardware to provide for a removable passenger backrest. In the front, our deep supportive bucket offers nearly nine inches of support without the use of a backrest! We've designed this system to work with your stock components so you can use the front and rear seats independantly if you prefer.

Corbin backrests are simple to install and adjust easily to your passenger's riding posture. Just slide the backrest shaft into the internal hardware and lock it in place with a single bolt. You can then set the backrest angle to the preferred setting and lock it in with the easily accessible adjustment screw. Choose from a variety of backrest styles to suit your taste although we recommend the #02-S Ovalbac for a good combination of looks and support. With a backrest in place, your copilot enjoys over nine inches of adjustable support!

Seat and backrest are built up with our exclusive Comfort Cell® foam. Comfort Cell® is nearly twice as firm as the stock foam so it offers long lasting support. This closed cell foam retains resilience indefinitely and will actually break in to take on your shape as the miles roll by. Under the foam is our rigid Fibertech basepan that is specially designed to support the foam shape and fit perfectly to every contour of your bike. The shape of this basepan fit's perfect to the hinged trunklid so it works just like your stock seat.

Genuine leather seating is included in your choice of colors and styles. Likewise, a tasteful color coordinated welt if you choose. Leather is a great seating surface for saddles because it is a natural product that will breathe and not trap too much heat against your body. It will also break in along with the foam shape and provide a personalized fit. Just be sure to care for it properly with a quality conditioner like our Saddle Cream. This will help your seat to remain weather resistant and age gracefully while it develops its own unique character (just like a leather jacket).

On the seat model we show on this page, we've used our standard natural grain black leather in the seating panels combined with Asphalt vinyl side panels, a black welt and a tasteful Tuck & Roll stitch. Asphalt vinyl sides provide an interesting texture visually while it supports the foam shape. This will keep your saddle tight and looking new longer. The combination show on this page looks custom yet is subtle enough that it doesn't overpower the look of your Majesty.

To further customize the look of your bike, we can provide a variety of back plate options on our Ovalbac series backrests. Our standard back plate has a leather look (ABS) or choose a Carbon-Fiber look or even primer if you'd like to have it custom painted. For a little extra, we can now provide one prepainted gloss black or a Chromed steel model if you want a flashier appearance.

Need a handy bit of storage for smaller items that you don't want bouncing around under the seat? Corbin's glovebox is an excellent solution for all your quick-access stuff. Simply replace the finishing plate on the Ovalbac model backrest and you've just added four liters of locking storage capacity. It's plenty for a couple bottles of water, cell phone, spare gloves, maps and other incidentals. Constructed of durable ABS plastic and available plain or prepainted for just a little extra. Be sure to provide us with the color code of your bike and we'll paint it to match your factory color! Check the Accessories tab for complete information.

Specs



Unique Technology

The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.



Fibertech™ Basepan

A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more...



Comfort Cell® Foam

The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort!



Ergonomic Shaping

A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.



Patented Manufacturing Technology

Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info



Genuine Leather

We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.

Key Lock Installation

This saddle model uses a new mounting system designed by Corbin to allow installation and removable with a simple key lock. Once the included brackets are installed, the saddle can be removed easily by just inserting and turning the key. Need a Demo ? Just click the button.


Modular seat system

This component is part of Corbin's patented modular seat system (US Patent #7,556,114). Engineered to work in a variety of configurations to provide maximum versatility on your motorcycle. A typical modular seat system consists of: Rider seat, Passenger seat, Smuggler trunk & Corbin backrest. 

Write a review

Note: HTML is not translated!
    Bad           Good

Captcha
  • Views: 595
  • Product Code: Y-MJSTY-4-F
  • Availability: 10
  • £0.00
  • Ex Tax: £0.00
    CONFIGURATOR

    Click the "Design It" button to explore. You will be taken to our visual design tool where you can experiment and share it with your friends, add it to your shopping cart or just play around for a bit.

Available Options




Tags: Two Piece saddle for Majesty 400, Y-MJSTY-4-F, Majesty