Two-Piece saddle for Honda CBR 600 RR

Two-Piece saddle for Honda CBR 600 RR

Help & Info



     

 


 

- Select the checkbox next to all parts you would like added to your cart. Please be sure to select your cover options, if applicable, before clicking the "Add To Cart" button.

 

- If you would like any further help or have any questions please either email or call

 

- Click for Configurator Help

#Conditioner
Saddle Cream®



  • Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application.
    * More Info *


Apparel

Tees, Hats & More




  • We're often asked about tees and such so we caved in and had some Corbin gear made up. This is where you'll * Find It *


Furniture

Barstools & Auto Furniture



  • Ready for a Corbin seat inside your house? Auto styled couches and our classic chrome and leather barstools are a big hit for the man cave!
    * Check 'em Out *

Measurements:
  • Rider Seating: 13" wide x 12.5" long
  • Approx. Seat Height: 32.5"
  • Passenger: 9.5" wide x 10" long


  • Corbin front saddle installs like stock with brackets premounted on the seat. Simply slide the saddle forward engaging the tongue located near the front of the saddle and secure it by pulling up on the rear corners of the seat and securing with the stock screws. Rear seat installs like stock using your existing key lock with brackets premounted on seat.

  • This rear saddle does not accept a removable backrest as there is not enough structural support under the seat to safely bear the load or leverage of a passenger's weight on a backrest. Sorry.


  • Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel....   don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?



  • Warning: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.



PleaseNote

Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.


Saddle Warranty

Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).


Fiberglass Warranty

Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
A note about paint color matching, Please Read


Export Sales

USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty and applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.


Corbin now offers an awesome pair of seats for the late model Honda 600 RR motorcycle. Designed specially to provide the luxury riders demand for longer range and sport touring comfort. Engineered to provide the perfect blend of comfort and the usual Corbin sleek styling with a range of custom options to create a unique look on your bike. Naturally, the fit and finish are perfected and pure Corbin.
Up front, the neutralized seating posture helps to reduce the tendency to slide forward in the saddle while on the brakes. This will greatly enhance your riding range by reducing strain on your wrists and knees. Corbin saddles are designed to help hold you in the sweet-spot on the bike but still allows for a range of movement for more spirited riding styles.

The sculpted riding position disperses body weight across a greater area so you enjoy mile after mile of comfort. We've greatly enhanced comfort by building the saddle up with our high density Comfort Cell® foam, but kept the racetrack styling and fit to tail section. Not only is the shaping already designed to fit the contour of the human body, but our exclusive foam material will adapt to take on your shape upon break in.

For your copilot we've taken the original race cowl shaping of the rear seat and converted it into a true passenger perch. Notice how we've shaped the saddle to provide sculpted support and weight dispersion similar to the front seat. This will give your passenger many miles of comfortable riding. Also like the front seat, we've neutralized the posture to help curb sliding forward.

Corbin's patented molding and manufacturing process provides a precision fit while the saddle rides on rubber bumpers to protect your paint. Leather seating panels are included along with a wide range of decorating options (shown here with Carbon-Fiber leather seating and Asphalt vinyl sides). Our leather seating provides a unique look, excellent comfort and will also break in along with your foam shape to give you a personalized fit over time. Coordinating vinyl sides keep the foam shape tight and the saddle looking sharp longer. Be sure to care for your leather saddle properly with a quality conditioner like our Saddle Cream. Your leather will age gracefully and develop its own unique character with proper care.
Specs



Unique Technology

The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.



Fibertech™ Basepan

A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more...



Comfort Cell® Foam

The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort!



Ergonomic Shaping

A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.



Patented Manufacturing Technology

Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info



Genuine Leather

We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.



Corbin Backrest System

The first and most versatile removable backrest system available for motorcycles! Corbin's backrests provide added vertical back support and long range comfort. Supported by internal hardware for a very clean look. Backrests adjust to rider's profile for a tailored fit and install or remove easily as desired. A very popular option! Click the button for additional info...



Patented Rumble Seat

The first and most versatile removable backrest system available for motorcycles! Corbin's backrests provide added vertical back support and long range comfort. Supported by internal hardware for a very clean look. Backrests adjust to rider's profile for a tailored fit and install or remove easily as desired. A very popular option! Click the button for additional info...

Key Lock Installation

This saddle model uses a new mounting system designed by Corbin to allow installation and removable with a simple key lock. Once the included brackets are installed, the saddle can be removed easily by just inserting and turning the key. Need a Demo ? Just click the button.




Electric Heat

As an option we can include electric heat in this saddle! This option provides a true bit of luxury for when the temperature starts to drop. Simple to install with major components pre-built into the saddle. Just wire in the included pigtail and you're ready to roll. Click the button at left for complete info...


Modular seat system

This component is part of Corbin's patented modular seat system (US Patent #7,556,114). Engineered to work in a variety of configurations to provide maximum versatility on your motorcycle. A typical modular seat system consists of: Rider seat, Passenger seat, Smuggler trunk & Corbin backrest. 

Write a review

Note: HTML is not translated!
    Bad           Good

Captcha
  • Views: 102
  • Product Code: H-6RR-5-F/R
  • Availability: 10
  • £0.00
  • Ex Tax: £0.00
    CONFIGURATOR

    Click the "Design It" button to explore. You will be taken to our visual design tool where you can experiment and share it with your friends, add it to your shopping cart or just play around for a bit.

Available Options



Tags: Two-Piece saddle for Honda CBR 600 RR, H-6RR-5-F/R, 2003 - 2016 CBR 600 RR