The Wall saddle for 2020 Indian Challenger

New The Wall saddle for 2020 Indian Challenger

Help & Info



     

 


 

- Select the checkbox next to all parts you would like added to your cart. Please be sure to select your cover options, if applicable, before clicking the "Add To Cart" button.

 

- If you would like any further help or have any questions please either email or call

 

- Click for Configurator Help

#Conditioner
Saddle Cream®



  • Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application.
    * More Info *


Apparel

Tees, Hats & More




  • We're often asked about tees and such so we caved in and had some Corbin gear made up. This is where you'll * Find It *


Furniture

Barstools & Auto Furniture



  • Ready for a Corbin seat inside your house? Auto styled couches and our classic chrome and leather barstools are a big hit for the man cave!
    * Check 'em Out *

Measurements:
  • Rider seating: 13" wide x 13" long, 6" vertical support


  • The Wall saddle installs on your bike like stock using the fender bracket at the rear and two mounting tabs at the front (under the side covers).


  • Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel....   don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?



  • Warning: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.



PleaseNote

Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.


Saddle Warranty

Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).


Fiberglass Warranty

Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
A note about paint color matching, Please Read


Export Sales

USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty and applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.


* Available January 2020 *

We call this newest incarnation of the classic Corbin fastback "The Wall" because of the impressive vertical back support brought about by the raised tail section. The taller and more vertical back area holds the rider in position more aggressively and provides excellent support. Works extremely well for hot rodded bikes and cafe racers where a less reclined posture is desired.

As far as passengers are concerned, the tail of the Wall saddle is padded and upholstered to provide for short trips. Although this is built with the same quality foam material as the rider's area, the shaping is designed primarily for looks and rider back support. When taking a passenger make sure you tell them to hold on tight!

Up front, the ergonomically designed platform increases the area of body contact to disperse rider weight evenly and eliminate hot spots. Dished in the center to eliminate pressure on the tail bone. At the nose of the saddle we sculpt it narrow to provide for good ground reach.

As always, our exclusive Comfort Cell® foam provides resilient comfort and a low seating platform for a slim profile. High density foam provides a long lasting ride and plenty of support. The entire saddle touches your Harley ONLY with rubber bumpers to protect your paint job. Provides a perfect fit and contours the crown and profile of the fender.

Available with the option of electric seat heater for an added bit of luxury. Wiring easily to your Challenger, the Corbin seat heater is controlled via a conveniently located switch along the rider seating position on the left side. You just wire in the Corbin supplied pigtail and enjoy the warmth on those chilly morning rides.

Includes genuine leather seating panels in your choice of colors and styles for a truly distinctive touch. Leather seating is best because it breathes with your body and will conform with the foam shape for a personalized fit after break in. Leather is also extremely durable for years of enjoyment. Over time your saddle will age and develop a unique character just like your leather jacket. If you care for it properly with a quality conditioner like our Saddle Cream, your leather saddle will be your riding buddy for many years.

Shown above in the following combination:
Grey Bomber Jacket seating and tail, Matte Black side panels, Natural Black trim, Chrome welt, Black stitching and Medium Silver Corbin logo.

The Wall saddle installs on your bike like stock using the fender bracket at the rear and two mounting tabs at the front (under the side covers).

The finest and most comfortable motorcycle saddles available. Manufactured with pride in the USA.
Specs


Unique Technology

The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.


Fibertech™ Basepan

A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more...


Comfort Cell® Foam

The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort!


Ergonomic Shaping

A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.


Patented Manufacturing Technology

Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info


Genuine Leather

We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.

Write a review

Note: HTML is not translated!
    Bad           Good

Captcha
  • Views: 107
  • Product Code: I-CR-W
  • Availability: 10
  • £0.00
  • Ex Tax: £0.00
    CONFIGURATOR

    Click the "Design It" button to explore. You will be taken to our visual design tool where you can experiment and share it with your friends, add it to your shopping cart or just play around for a bit.

Available Options



Tags: The Wall saddle for 2020 Indian Challenger, I-CR-W, 2020 Challenger