Sport Bucket Seats for Polaris Slingshot

Sport Bucket Seats for Polaris Slingshot

Help & Info



     

 


 

- Select the checkbox next to all parts you would like added to your cart. Please be sure to select your cover options, if applicable, before clicking the "Add To Cart" button.

 

- If you would like any further help or have any questions please either email or call

 

- Click for Configurator Help

#Conditioner
Saddle Cream®



  • Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application.
    * More Info *


Apparel

Tees, Hats & More




  • We're often asked about tees and such so we caved in and had some Corbin gear made up. This is where you'll * Find It *


Furniture

Barstools & Auto Furniture



  • Ready for a Corbin seat inside your house? Auto styled couches and our classic chrome and leather barstools are a big hit for the man cave!
    * Check 'em Out *

Measurements:
  • Seat Back: 14" wide at Shoulder x 19.5" wide at Side Bolster x 33.5" tall
  • Seating: 18.5" wide x 20" long


  • Installation is fairly simple and uses standard hand tools. Electric heated seats include a wiring pigtail that integrates with stock harness. We include switches for the dashboard.

  • We specifically built the headrest further back to allow for those who wear a helmet when driving the Slingshot. Here you can see the Corbin headrest adds 1.5 inches of clearance.

  • We'll have a visual configurator available in just a week or so. In the mean time if you have any questions about how to choose materials for your seat covers, please refer to these illustrations.


  • Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel....   don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?



  • Warning: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.



PleaseNote

Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.


Saddle Warranty

Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).


Fiberglass Warranty

Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
A note about paint color matching, Please Read


Export Sales

USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty and applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.


Our first thought when we picked up the Slingshot was that the guys (and gals) that make racing seats would have this market pretty much wrapped up before we'd have a chance to launch. Turns out standard automotive seats are a bit too much for the Slingshot's passenger cabin. Good news for us!

What we did was design new platforms that work on your existing Polaris seat frame and slider. Instead of building up complete racing style seats with shoulder bolsters, we opted more for a Sport Bucket style that gives you thigh and side bolsters, but keeps your shoulders free. Not only does this look more appropriate inside the Slingshot, but it maximizes cabin space and doesn't make you feel cramped.

Naturally we used our expertise in seat design to provide seat and back panels that cradle your body ergonomically. This gives you excellent, long range support that eliminates hot spots. We also made the thigh bolsters with a softer angle so they add more seating area for more square inches of body contact. This helps hold your body in place yet not "confined" while giving additional comfort value.

If your area constabulary requires the use of a helmet (like they do here) you're going to love this... We've taken the big bumps out of the headrests! The stock shape is fine if you're crusing along with your hair in the air, but the moment you don a helmet they become a serious aggravation. So we've provided just enough extra room to allow for the helmet but still provide the needed support and whiplash protection. This equates to approximately 1.5 inches if you're wondering.

* Read * We've also angled the seat base to the rear a bit. This helps to keep you firmly planted in the seat while it also supports under your legs for added weight distribution. Seating length of twenty inches gives generous support.

On the inside we build these up with our proprietary Comfort Cell foam. This closed cell foam provides a firm ride that supports your body indefinitely and doesn't lose resilience over time. After a break in period, Comfort Cell will begin to take on the rider's shape for give personalized support.

On top we use genuine leather seating with a wide range of color and texture options. Leather will breathe with your body and break in along with the foam for a personalized fit. Above we show our seats decked out as follows:
Driver:    Black natural grain leather seating, Red Carbon-Fiber trim, Asphalt side panels and Black Diamond stitching.
Passenger:    Black natural grain leather seating, Burgundy Ostrich trim, Asphalt side panels and no stitch pattern.

Corbin's Sport Bucket seats also have the option of electric heaters built in. These seats feature a heating unit in both the seat base AND the seat back. You'll be amazed at how well this works to make your whole body feel warmer on those chilly morning rides. Our heater units are full self contained within the seat and come pre-installed. We include a wiring pigtail that integrates with your Slingshot's harness and runs up to the dash to plug into our included heater switches. Installation requires only standard hand tools and a little patience.

Speaking of heat, have you noticed how hot the seats get if you leave your Slingshot sitting in the sun for a little while? We've got that licked by including a fabric sunshade with every seat. Build specifically for our seats, this stretchy material pulls over the seat to give some shade while you're out and about. When you get back, just pull the cover off and stow it away in the handy storage pouch built into the back of the headrests.

Our Fibertech base material and patented manufacturing process allow a perfect fit to the Polaris seat frame. This rigid baseplate provides the seat with a firm foundation to support the carefully designed ergonomics of the foam. The seat components mount easily with included hardware.

Specs



Unique Technology

The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.



Fibertech™ Basepan

A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more...



Comfort Cell® Foam

The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort!



Ergonomic Shaping

A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.



Patented Manufacturing Technology

Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info



Genuine Leather

We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.



Corbin Backrest System

The first and most versatile removable backrest system available for motorcycles! Corbin's backrests provide added vertical back support and long range comfort. Supported by internal hardware for a very clean look. Backrests adjust to rider's profile for a tailored fit and install or remove easily as desired. A very popular option! Click the button for additional info...



Patented Rumble Seat

The first and most versatile removable backrest system available for motorcycles! Corbin's backrests provide added vertical back support and long range comfort. Supported by internal hardware for a very clean look. Backrests adjust to rider's profile for a tailored fit and install or remove easily as desired. A very popular option! Click the button for additional info...

Key Lock Installation

This saddle model uses a new mounting system designed by Corbin to allow installation and removable with a simple key lock. Once the included brackets are installed, the saddle can be removed easily by just inserting and turning the key. Need a Demo ? Just click the button.




Electric Heat

As an option we can include electric heat in this saddle! This option provides a true bit of luxury for when the temperature starts to drop. Simple to install with major components pre-built into the saddle. Just wire in the included pigtail and you're ready to roll. Click the button at left for complete info...


Modular seat system

This component is part of Corbin's patented modular seat system (US Patent #7,556,114). Engineered to work in a variety of configurations to provide maximum versatility on your motorcycle. A typical modular seat system consists of: Rider seat, Passenger seat, Smuggler trunk & Corbin backrest. 

Write a review

Note: HTML is not translated!
    Bad           Good

Captcha
  • Views: 274
  • Product Code: P-SS-SEAT
  • Availability: 10
  • £0.00
  • Ex Tax: £0.00
    CONFIGURATOR

    Click the "Design It" button to explore. You will be taken to our visual design tool where you can experiment and share it with your friends, add it to your shopping cart or just play around for a bit.

Available Options





Tags: Sport Bucket Seats for Polaris Slingshot, P-SS-SEAT, Slingshot