Smuggler for Yamaha FJR 1300

Smuggler for Yamaha FJR 1300

Help & Info



     

 


 

- Select the checkbox next to all parts you would like added to your cart. Please be sure to select your cover options, if applicable, before clicking the "Add To Cart" button.

 

- If you would like any further help or have any questions please either email or call

 

- Click for Configurator Help

#Conditioner
Saddle Cream®



  • Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application.
    * More Info *


Apparel

Tees, Hats & More




  • We're often asked about tees and such so we caved in and had some Corbin gear made up. This is where you'll * Find It *


Furniture

Barstools & Auto Furniture



  • Ready for a Corbin seat inside your house? Auto styled couches and our classic chrome and leather barstools are a big hit for the man cave!
    * Check 'em Out *

Measurements:
  • Rider seating: 13" wide x 14.5" long x 6"
  • Approx. seat height: 31.5"
  • Smuggler Capacity: Approx. 11.5 Liters


  • Front saddle mounts very easily and uses your existing key lock with brackets preinstalled on the saddle.

  • The Smuggler trunk or rear saddle bolts down to the subframe and the front seat latches on your bike like stock. Corbin components will interchange and work with your stock seat components.


  • Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel....   don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?



  • Warning: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.



PleaseNote

Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.


Saddle Warranty

Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).


Fiberglass Warranty

Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
A note about paint color matching, Please Read


Export Sales

USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty and applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.


As a part of our modular seating system, we have created this very slick Smuggler trunk design that will integrate with either the Corbin front saddle or your stock front seat. This allows you to easily convert your bike from solo to dual using your existing key lock system. Smuggler provides a very clean, integrated look and the most convenient storage available. Our unique mounting system allows all components to work with your stock key lock system for hassle free conversion. Up front, the enhanced ergonomics of our front saddle creates a perch that provides long range, sport touring comfort.

Naturally we've built the Smuggler to fit perfectly to the lines of the FJR to create an integrated look. Our patented molding process and exclusive materials create a part with very minimal variation from piece to piece so we can design a precision fit to the bodywork. Naturally, the Corbin wizards have designed a shape that picks up and enhances the lines of your bike. Smuggler comes prepainted to coordinate with your stock paint (please specify color) and provides a secure area to stow essentials.

Smuggler's capacity of 11.5 liters helps to keep all your essential gear handy. That's more than enough room for keys, maps, spare gloves, cell phone, PDA, bottled water.... there's even enough room for your digital camera in there (even an SLR!) You'll find the Smuggler so convenient that you'll be getting stuff out of it every time you stop your bike. Naturally it comes fully finished to coordinate with your stock paint color so the looks are spectacular right out of the box.

Front saddle uses our exclusive high-density Comfort Cell foam that allows us to build a supportive saddle without a bulky shape. Corbin's Wizards are masters at combining form and function into a saddle that makes you as happy to look at as it does to ride on. Notice how the bucket is designed to emulate the shape of your body. This gives excellent support for longer range. Neutralized seating helps to curb sliding in the saddle which greatly reduces rider fatigue. Our front saddle can be used with the Corbin rear seat, Smuggler trunk or your stock rear seat. When using the Corbin rear seat, a passenger backrest is also available for your copilot's comfort and security.

We include your choice of color options for looks from outrageous to stealthy. We've created a cover design and stitch pattern that coordinates with the FJR perfectly and adds to the visual appeal. Shown here we've used black leather seating panels with Asphalt vinyl side panels, but the whole range of leather and vinyl options are included at no additional charge. Leather seating offers durability and a luxurious ride that breathes with your body and will adapt with the foam shape during break in.

For those chilly morning rides, the Corbin front seat has the option of electric heating. Our seat wires easily into your fusebox and maintains the proper temperature automatically through an integrated controller. Simply flip the conveniently located switch along the left side of the saddle and enjoy the warmth. Comes completely preinstalled in the saddle and you need only integrate the included pigtail to your fuse box. Because of the two piece design, front and back saddle (if used) have separate switches that run through a dual pigtail.

Pictures just don't do it justice. When you see in person how well the trunk is integrated to the FJR bodywork, you'll be amazed. Notice how closely the Corbin designers were able to make the Smuggler fit to the complex shaping of the FJR tail section. The graceful, aerodynamic looks have been kept true for the best possible visual appeal. Smuggler is constructed of our durable Fibertech material for a fine finish and long term durability.

11.5+ liter storage area. Smuggler comes fully lined to help protect your cargo and cushion some of the road noise. Naturally, the door opening is fully weather stripped to guard against foul weather as well. Locking door keeps things secure and simple to access. Our new stainless steel hinge mechanism allows the door to open very wide to keep it out of the way when stowing your gear.

Corbin's Smuggler trunk was designed with the Sport Touring enthusiast in mind. Since storage always seems to be an issue for touring, we made sure that our Smuggler would work properly with the Givi topcase installed. There are two models of the Givi topcase available and we show our Smuggler here working with the larger one. Naturally the smaller Givi topcase works fine too. Notice, the Smuggler door will open & close with the Givi topcase installed and there is no need to remove the trunk to access the Smuggler.

Inside the saddle we use our exclusive Comfort Cell foam to provide a firm, resilient ride that gives you long lasting support. Foam density is an important factor in long range comfort and we always say... "Firm is a good thing". Corbin uses a very unique formula of purpose built materials in our manufacturing process. Combine this with over three and a half decades of design experience and you have what is commonly considered the World's Finest Motorcycle Seat. Comfort Cell® foam combined with our patented molding process deliver unmatched contoured support. Corbin saddles feel firm when you first ride on them, but will break in and adapt to your body and support you in comfort for years to come. Enjoy the ride!
Specs
Fibertech Construction
Smuggler is manufactured of our exclusive Fibertech™ material for durability and a clean finish. Specially formulated for Corbin, Fibertech™ gives us very tight tolerances with minimal shrinkage so each part comes out true to the original design.



Unique Technology

The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.



Fibertech™ Basepan

A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more...



Comfort Cell® Foam

The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort!



Ergonomic Shaping

A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.



Patented Manufacturing Technology

Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info



Genuine Leather

We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.

Key Lock Installation

This saddle model uses a new mounting system designed by Corbin to allow installation and removable with a simple key lock. Once the included brackets are installed, the saddle can be removed easily by just inserting and turning the key. Need a Demo ? Just click the button.




Electric Heat

As an option we can include electric heat in this saddle! This option provides a true bit of luxury for when the temperature starts to drop. Simple to install with major components pre-built into the saddle. Just wire in the included pigtail and you're ready to roll. Click the button at left for complete info...

g! Heater elements should never be installed in motorcycle seats used by riders that cannot sense heat.


Modular seat system

This component is part of Corbin's patented modular seat system (US Patent #7,556,114). Engineered to work in a variety of configurations to provide maximum versatility on your motorcycle. A typical modular seat system consists of: Rider seat, Passenger seat, Smuggler trunk & Corbin backrest. 

Finish
We use a quality gel-coat for a nice finish that doesn't show material weave. This model is available prepainted to coordinate with your stock paint.
Smuggler Interior
Corbin Smuggler comes fully lined with a nice, thick grey liner on the inside to protect your cargo. Sure seal weather stripping around the doors keeps out the elements. Locking door keeps contents secure.

Write a review

Note: HTML is not translated!
    Bad           Good

Captcha
  • Views: 1460
  • Product Code: Y-FJR-13-SMUG
  • Availability: 10
  • £0.00
  • Ex Tax: £0.00

Available Options

Tags: Smuggler for Yamaha FJR 1300, Y-FJR-13-F,