Rumble Seat for Yamaha Warrior

Rumble Seat for Yamaha Warrior

Help & Info



     

 


 

- Select the checkbox next to all parts you would like added to your cart. Please be sure to select your cover options, if applicable, before clicking the "Add To Cart" button.

 

- If you would like any further help or have any questions please either email or call

 

- Click for Configurator Help

#Conditioner
Saddle Cream®



  • Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application.
    * More Info *


Apparel

Tees, Hats & More




  • We're often asked about tees and such so we caved in and had some Corbin gear made up. This is where you'll * Find It *


Furniture

Barstools & Auto Furniture



  • Ready for a Corbin seat inside your house? Auto styled couches and our classic chrome and leather barstools are a big hit for the man cave!
    * Check 'em Out *

Measurements:
  • Rider Seating: Approx. 13" wide x 18" long
  • Passenger: Approx. 8" wide x 10" long


  • Installation: Rumble seat installs easily on your bike with a tongue in the rear and a latch bracket in the front just like your stock seat. Simply engage the rear tongue into the bracket on your rear fender and lower the front into the Yamaha key lock. All brackets come pre-installed on your new Corbin seat... Very simple and very clean.

  • Two brackets will be included with your Rumble Seat: One is designed for the 2002 - 2003 models, the other is for the 2004 - 2009 models.

  • Corbin's Rumble Seat will NOT work with sissy bars installed.


  • Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel....   don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?



  • Warning: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.



PleaseNote

Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.


Saddle Warranty

Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).


Fiberglass Warranty

Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
A note about paint color matching, Please Read


Export Sales

USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty and applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.


Corbin's Patented Rumble Seat design is back! By popular demand, we have re-engineered our exclusive design that offers you the best of both worlds... Slick solo looks and passenger capability with a flip of the wrist. Convenient and easy to use, this seat design features an all new hinge mechanism that secures the passenger fold down backrest in either position effortlessly. Just fold it up or down and you're ready to roll.

For solo cruising, the passenger rest provides a slick look similar to our original Gunfighter saddle design. When you wish to carry passengers, just fold up the rear pad to reveal a generous passenger seating area complete with backrest. Of course the passenger seat and backrest pad are constructed with our Comfort Cell® foam as well to give excellent support and riding range. This is the most versatile seat design available for your Warrior and is available exclusively from Corbin.

Naturally, the Rumble Seat is designed for excellent rider comfort and is built up of our exclusive Comfort Cell® foam. Our foam material feels firm when you first ride it, but this firmness is what gives you the ability to ride great distances in comfort... long lasting support! The front seating area is ergonomically contoured to provide a larger area of body contact and excellent weight distribution. The fold down passenger rest adds extra seat height to give you additional back support and longer riding range. Passenger seating is generous and perfect for short to mid-range rides with the backrest in the flipped up position.

Rumble Seat features genuine leather seating for a perch that breathes with your body and breaks in with the foam shape for a personalized fit. Choose from a variety of leather styles to customize the look of the saddle. In the side panels and tail, we use a coordinating vinyl material to keep your foam shape tight and the saddle looking sharp longer. On the rear, we finish it of with gloss black ABS panels that you can easily remove and take to your favorite painter like we did with the ones on this model.

Foam density is an important factor in long range comfort and we always say... "Firm is a good thing". Corbin uses a very unique formula of purpose built materials in our manufacturing process. Combine this with over three and a half decades of design experience and you have what is commonly considered the World's Finest Motorcycle Seat. Comfort Cell® foam combined with our patented molding process deliver unmatched contoured support. Corbin saddles feel firm when you first ride on them, but will break in and adapt to your body and support you in comfort for years to come. Enjoy the ride on an authentic Corbin saddle!

Leather makes an excellent cover for a motorcycle seat because it is extremely durable and luxurious to ride on. As your saddle ages, the leather will take on its own unique character just like your leather jacket does. Just be sure to care for it properly with a quality leather conditioner like our Saddle Cream. Regular conditioning will help your saddle to resist the elements and remain supple for many years.

Specs



Unique Technology

The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.



Fibertech™ Basepan

A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more...



Comfort Cell® Foam

The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort!



Ergonomic Shaping

A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.



Patented Manufacturing Technology

Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info



Genuine Leather

We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.



Patented Rumble Seat

The first and most versatile removable backrest system available for motorcycles! Corbin's backrests provide added vertical back support and long range comfort. Supported by internal hardware for a very clean look. Backrests adjust to rider's profile for a tailored fit and install or remove easily as desired. A very popular option! Click the button for additional info...

Key Lock Installation

This saddle model uses a new mounting system designed by Corbin to allow installation and removable with a simple key lock. Once the included brackets are installed, the saddle can be removed easily by just inserting and turning the key. Need a Demo ? Just click the button.




Electric Heat

As an option we can include electric heat in this saddle! This option provides a true bit of luxury for when the temperature starts to drop. Simple to install with major components pre-built into the saddle. Just wire in the included pigtail and you're ready to roll. Click the button at left for complete info...

Write a review

Note: HTML is not translated!
    Bad           Good

Captcha
  • Views: 565
  • Product Code: Y-W-FLIP
  • Availability: 10
  • £0.00
  • Ex Tax: £0.00
    CONFIGURATOR

    Click the "Design It" button to explore. You will be taken to our visual design tool where you can experiment and share it with your friends, add it to your shopping cart or just play around for a bit.

Available Options



Tags: Rumble Seat for Yamaha Warrior, Y-W-FLIP, Warrior