Rumble Seat for 2006 - 2017 Harley-Davidson Dyna-Glide

Rumble Seat for 2006 - 2017 Harley-Davidson Dyna-Glide

Help questions

If you would like any further help or have any questions please either email or call

#Conditioner
Saddle Cream®



  • Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application.
    * More Info *


Apparel

Tees, Hats & More




  • We're often asked about tees and such so we caved in and had some Corbin gear made up. This is where you'll * Find It *


Furniture

Barstools & Auto Furniture



  • Ready for a Corbin seat inside your house? Auto styled couches and our classic chrome and leather barstools are a big hit for the man cave!
    * Check 'em Out *

Measurements:
  • Rider Seating: 13" wide x 15" long
  • Rider Back support: 7"
  • Passenger seating: 8" wide x 10" long
  • Passanger Back support: 10"
  • Approx. seat height: 28"


  • The Corbin Rumble Seat installs on your bike easily with our new keylock system. Just install the included latch pin into your fender where the original seat screw went. Now slip the nose of the seat into position engaging the seat nose tab into your chassis and lowering the rear of the seat onto the latch pin. Push down on the tail until you hear two clicks. Now go riding!

  • Seat heater assembly comes preinstalled on the saddle and ready to go. We supply the wiring pigtail and adapter to connect the seat directly into your stock fusebox. This is a simple procedure that can be handled by virtually any home mechanic.

  • Passenger seating is not heated on this model.

  • Rumble seat does not work on the Street Bob (FXDB) rear fender.


  • Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel....   don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?



  • Warning: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.



PleaseNote

Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.


Saddle Warranty

Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).


Fiberglass Warranty

Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
A note about paint color matching, Please Read


Export Sales

USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty and applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.


test

Corbin's Rumble Seat offers comfort for one or two riders with a sweet, swoopy look that ties in beautifully with the new design of the Dyna-Glides. This saddle has been exquisitely shaped to follow each and every contour of the bike along the tank, chassis and up over the graceful curve of the fender. This perfected form and close fit is possible only with Corbin's patented integrated molding technology.

Traditionally if you wanted a solo look on your bike you had to keep a separate passenger pillion seat available for the days when you're taking a copilot. This meant you had to plan ahead for passengers and it sometimes involved installation headaches. That's all changed with the Corbin Rumble Seat... no external brackets, no install hassles, just a flip of the wrist and you're ready to go. This clever design also integrates a passenger backrest for their added comfort.

Convenient and easy to use, this seat design features an all-new hinge mechanism that secures the fold down backrest in either position effortlessly. Just fold it up or down and our patented spring indexed hinge holds it in position and you're ready to roll. The saddle looks great in either position and is finished in your choice of styles for a totally custom look.

Of course the comfort is pure Corbin with our exclusive Comfort Cell® foam material and ergonomically designed seating. Notice how the rider's position is sculpted to fit the shape of the human body? That provides more square inches of body contact and helps to eliminate pressure points that cause hot spots. Inside, our foam material gives a firm, resilient ride that supports you indefinitely. Over time, the foam will actually break in and conform to your specific body shape for a personalized fit. Our foam material feels firm when you first ride it, but this firmness is what gives you the ability to ride great distances in comfort.

In the rear, Rumble seat offers generous passenger accommodations with over 70 square inches of body contact area and ten inches of vertical back support. This provides excellent medium range comfort while keeping an exquisite look. When folded down, the passenger rest provides a look similar to our original Gunfighter saddle design and adds a bit more back support to the front seating position.

On the back of the Rumble Seat, we finish it off with custom designed ABS plates that come pre-painted gloss black for a clean look. We've incorporated the triple rib into the rear of the Rumble seat to add a bit of visual interest. For those of you who are looking at custom painting your Dyna in the future, the plates can easily be removed and sent along with your sheet metal to your painter.

As with most Corbin saddles, this seat uses genuine leather seating panels for a ride that breathes with your body. Luxurious and durable, leather will provide comfort for many years and will break in along with the foam shape for a personalized fit to your posture. Available plain or with the 04-Deco stitch shown (stitch is mandatory for heated seat models). Be sure to take proper care of your leather saddle with a good conditioner like Corbin's Saddle Cream. This will help it to resist the elements and remain supple.

For simple installation, we've designed this model to work with a Corbin key lock system. Just install the included stainless steel latch pin into the standard location in your fender and slide the saddle into position nose first engaging the tongue into the chassis and the rear down onto the pin to latch.

Insist on a genuine Corbin saddle to improve the comfort and style of your new ride and look for that Corbin label! It's the mark of quality fit for your new Dyna-Glide.

Specs




Unique Technology

The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.




Fibertech™ Basepan

A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more...




Comfort Cell® Foam

The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort!




Ergonomic Shaping

A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.




Patented Manufacturing Technology

Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info




Genuine Leather

We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.




Patented Rumble Seat

The first and most versatile removable backrest system available for motorcycles! Corbin's backrests provide added vertical back support and long range comfort. Supported by internal hardware for a very clean look. Backrests adjust to rider's profile for a tailored fit and install or remove easily as desired. A very popular option! Click the button for additional info...


Key Lock Installation

This saddle model uses a new mounting system designed by Corbin to allow installation and removable with a simple key lock. Once the included brackets are installed, the saddle can be removed easily by just inserting and turning the key. Need a Demo ? Just click the button.

Write a review

Note: HTML is not translated!
    Bad           Good

Captcha

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Aliquam iaculis egestas laoreet. Etiam faucibus massa sed risus lacinia in vulputate dolor imperdiet. Curabitur pharetra, purus a commodo dignissim, sapien nulla tempus nisi, et varius nulla urna at arcu.Lorem ipsum dolor sit amet, consectetur adipiscing elit. Aliquam iaculis egestas laoreet. Etiam faucibus massa sed risus lacinia in vulputate dolor imperdiet. Curabitur pharetra, purus a commodo dignissim, sapien nulla tempus nisi, et varius nulla urna at arcuLorem ipsum dolor sit amet, consectetur adipiscing elit. Aliquam iaculis egestas laoreet. Etiam faucibus massa sed risus lacinia in vulputate dolor imperdiet. Curabitur pharetra, purus a commodo dignissim, sapien nulla tempus nisi, et varius nulla urna at arcu. 

  • Views: 440
  • Brand: Harley-Davidson
  • Product Code: HD-FXD-6-FLIP
  • Availability: 10
  • £0.00
  • Ex Tax: £0.00

Available Options

Tags: Rumble Seat for 2006 - 2017 Harley-Davidson Dyna-Glide, HD-FXD-6-FLIP, 2006 - 2017 Harley-Davidson Dyna Glide / FXDI, FXDCI, FXDBI, FXDLI & FXDSE