This version of Corbin's Dual Touring Saddle is designed to work with two Corbin backrests or our Tourbox, but will not work with the Indian sissybar or Roadmaster trunk.


Our new Dual Touring saddle is the perfect blend of form and function for the new Chief models. As always, we've maximized the seating area and positioned the rider bucket in the sweet spot to offer the best possible ergonomics and long range comfort. Sculpted seating platforms conform to the shape of your body to give more square inches of even support and eliminate hot spots and pressure on your tailbone. 

Neutralized seating platform helps to hold your body in place and curbs sliding in the saddle. This also helps to relieve rider fatigue by taking pressure off your wrists and knees. Our exclusive Comfort Cell foam material on the inside provides a firm, resilient ride that supports your body indefinitely. Over time, Comfort Cell will break in and adapt to provide a personalized fit to your body. 

Bucket shaping of the front seating area gives an unprecedented amount of body support. Notice how it curves up at the back to provide over six inches of support to your lower back. Towards the front of the bucket we design the saddle narrower to allow for ground reach. Smaller riders may prefer to slide forward and out of the bucket at stop signs for best ground reach. 


Dual Touring saddle accepts an adjustable backrest in both the rider and passenger seating areas. Corbin backrests install and remove easily with a single bolt and adjust to provide a tailored fit to rider posture. In the front, we've built in special hardare that also allows the backrest to be adjusted fore and aft. You can use a single backrest transferred front to back as needed or two for full time use. 

Backrests are available in several styles to suit your taste. We've found the #297-SB standard and #02-SB Ovalbac to provide the right blend of clean visuals and rider support. Both give you an additional nine inches of vertical support and are sculpted to fit the shape of your back. Covered with genuine leather to match your saddle and built up with Comfort Cell foam for long lasting comfort. At the rear we offer a variety of finishing plate options. Our standard plate is a black leather look, but for a little extra we can provide it prepainted to coordinate with your stock paint for a truly integrated look. Our Ovalbac model backrest also offers the option of a chromed steel finishing plate.

Corbin's Dual Tour has the option of electric seat heaters in both the rider and passenger seating positions. Both the rider and passenger areas are controlled independently via conveniently located switches in the left side panels. Our seat can plug directly into wiring that exists on the motorcycle. 

Our Fibertech base material and patented manufacturing process allows a perfect fit to the lines of the fender and tank. This rigid baseplate provides the saddle with a firm foundation to support the carefully designed ergonomics of the foam. The entire seat rides on rubber bumpers to protect your paint job and mounts to your bike with a tongue in the front and single screw into your fender at the rear. 

On the outside we use genuine leather seating for a luxurious ride that breathes with your body. We have obtained a special distressed tan leather just for Indian models to coordinate with their accessories or choose our standard natural grain black leather depending on your bike's options. We've designed a cover pattern that blends visually with the Chief's visuals and allows a variety of customization options like a tasteful color coordinated welt (shown). Genuine leather fringe lends a truly classic look and is available at no extra charge if desired. In keeping with the design of the OEM components, we've incorporated an oversized stitching so you keep consistent look across all components and that vintage appeal. 

Regarding Indian Concert Saddlebag Audio Kit: We have retooled our saddle and provided room under the basepan for the amplifier used in this kit, but the Corbin amplifier relocation bracket MUST be used. Our bracket lowers the mounting point of the unit to allow for the improved seating position and ergonomics of the Corbin saddle. We provide this bracket at no charge if you own or are purchasing the Corbin saddle. 

Seat ComparisonRegarding Seat Height: We measured the effective seat height of our Dual Tour and Classic Solo saddles and came up with numbers that don't jive with the OEM spec. We're not sure how they measured, but we made the Corbin saddles as low as practical to put the rider is the sweet spot on the bike. This changes the seat height, but we think this visual comparison makes more sense than the numbers. Just click on the image at right to check it out.

Specs



Unique Technology

The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.



Fibertech™ Basepan

A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more...



Comfort Cell® Foam

The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort!



Ergonomic Shaping

A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.



Patented Manufacturing Technology

Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info



Genuine Leather

We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.



Corbin Backrest System

The first and most versatile removable backrest system available for motorcycles! Corbin's backrests provide added vertical back support and long range comfort. Supported by internal hardware for a very clean look. Backrests adjust to rider's profile for a tailored fit and install or remove easily as desired. A very popular option! Click the button for additional info...


Electric Heat

As an option we can include electric heat in this saddle! This option provides a true bit of luxury for when the temperature starts to drop. Simple to install with major components pre-built into the saddle. Just wire in the included pigtail and you're ready to roll. Click the button at left for complete info...



Warning! Heater elements should never be installed in motorcycle seats used by riders that cannot sense heat.
Accessories


Conditioner


Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. 
*More Info*


Apparel

We're often asked about tees and such so we caved in and had some Corbin gear made up. This is where you'll *Find It*


Ready for a Corbin seat inside your house? Auto styled couches and our classic chrome and leather barstools are a big hit for the man cave!
Check 'em Out *

Notes
Measurements

Rider seating: 15" wide x 17" long x 6.5" deep
Rear area: 14" wide x 14" long
Approx seat height: 28.75"

Installation

#I-DT-E



Corbin's Dual Touring saddle installs similar to stock with a tongue in the front and a single bolt into the fender at the rear. Due to the strength and rigidity of the Corbin basepan material, the center mounts are not required. This makes installation a breeze!


Corbin's heater unit will plug directly into wiring that is already on the Indian.


Although we don't show it in the photos above, Indian offers a tan colored tank panel for the Chief. Ask your dealer for item #2685660-02.


AUDIO KIT NOTE: Corbin amplifier bracket (#I-AMP-BK) is required for the Corbin Dual Tour saddle to function with the Indian Concert Saddle Bag Audio Kit. This bracket lowers the unit so we can keep the improved ergonomics and rider positioning of the Corbin designed saddle. Bracket will be provided free of charge to owners of the Corbin Indian saddle.


BLUETOOTH AUDIO KIT: The handlebar audio kit uses amps internal to the speaker pods and does NOT require use of the Corbin amp bracket.


NOTE: Corbin's Dual Tour includes matching leather fringe. If you do NOT want fringe, please specify in the notes on your order.


Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.... don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?



WARNING: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.
Warranty
Please Note
Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
Saddle Warranty
Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
Fiberglass Warranty
Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number. A note about paint color matching, Please Read
Export Sales
USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.

Write a review

Note: HTML is not translated!
    Bad           Good

Dual Touring saddle for 2014-2015 Indian Chief models

  • Brand: Corbin
  • Product Code: I-DT-E
  • Availability: In Stock
  • £0.00


Available Options


Related Products

Saddle Cream

Saddle Cream

To assure many years and untold miles of faithful service, be sure to care for your leather saddle w..

£0.00

Tags: Dual Touring saddle for 2014-2015 Indian Chief models

Fibertech Basepan Fiberglass Warranty HD-FLH-9-PAD Ergonomic Shaping trunxbox Sissybar Pads 224 hd-box-1h Electric Heat HD-FLH-9-ARM Backrest System Integrated Molding Genuine leather Key lock installation streamliner1 RK-PAD Rumble Seat streamliner1 Color Matching Honda CRF250L Sissybar Pads 225 Sissybar Pads 210 hd-box