Corbin Super Motard Saddle 2003: 200, 250 & 400 SX 2004 - 2005: 250, 400, 450, 520 2005 - 2006: 450, 525 SX/XC 2004-2007: 525 EXC

One of the hottest trends in the industry today is the Super-Motard. The Wizards in our custom ride-in department have been making special seat models for motard conversions made from KTMs, Suzuki DRs, Honda XRs and just about anything else you can think of (and who wouldn't love a street bike with twelve inches of suspension travel anyway?) If you're about to put some street skins on your KTM and you need a seat that looks cool and feels great, we've gotcha covered. 

Hooligan bikes have gotta look tough and that's half the fun of this seat model. Notice how we've tapered the rear section of the seat into the fender and color coordinated it for a totally integrated look. This "tail section" we've built up also gives you a nice bump pad to sit into and helps keep you in position on the bike. Seating platform is totally neutralized to curb sliding in the saddle which eliminates fatigue over the long run. 

The other half of the equation is the legendary Corbin comfort. Inside the saddle we use a proprietary foam material called Comfort Cell that provides a firm, resilient ride that lasts. Developed especially for Corbin and our patented manufacturing technique, Comfort Cell can be cast to the density best suited for each saddle design. This allows us to make each saddle provide just the right amount of support... too soft and you feel like you're bouncing off the basepan, too hard and you may as well be sitting on the fender. 

Casting our foam allows us to design complex shapes that conform to the contours of your body. We call this "ergonomic shaping" and it gives you more square inches of body contact for better weight dispersion. This shaping also helps to eliminate pressure points and hot spots created by flat seats and soft foam. Towards the nose we keep the shape narrow to aid ground reach. 

On top we use only the highest grade of weather resistant materials for durability and long life. You know we couldn't stop there, so we dressed it up in a Carbon-Fiber embossed vinyl seating and color coordinating orange tail section. Cover is completely hand sewn and riveted to our rigid Fibertech basepan. Naturally, the material selection is completely up to you even is you just want a plain black saddle... we aim to please. Saddle installs with a single bolt and rides on rubber bumpers to protect your bodywork and chassis. 

Inside we use our high density Comfort Cell® foam for firm support that won't break down while you're riding. Comfort cell® is one of the critical elements to Corbin's legendary saddle comfort. To learn more about the design and technology behind the original Corbin saddle, just click on the logo. This animation gives a graphic representation of how the Corbin saddle is designed to function compared to your stock seat. Over 36 years of saddle making experience goes into the production of the Corbin seat and we carefully choose the specialty materials used in their manufacture.

Specs


Unique Technology

The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.

Fibertech™ Basepan

A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more...


Comfort Cell® Foam

The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort!


Ergonomic Shaping

A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.


Patented Manufacturing Technology

Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info

Accessories


Conditioner


Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. 
*More Info*


Apparel

We're often asked about tees and such so we caved in and had some Corbin gear made up. This is where you'll *Find It*


Ready for a Corbin seat inside your house? Auto styled couches and our classic chrome and leather barstools are a big hit for the man cave!
Check 'em Out *

Notes
Measurements

Seating Area: 8.5" wide x 20" long 
Approx. seat height: 36.5" unloaded


Works with stock or IMS gas tank.


Installs easily with a tongue in the front and a single bolt into the saddle from under the fender. Be sure to tighten securely to assure saddle does not work loose accidentally. We recommend 7 - 8 ft lbs.


This saddle fits the following KTM models: 
2003: 200, 250 & 400 SX 
2004 - 2005: 250, 400, 450, 520/525 EXC 
2005 - 2006: 450, 525 SX


Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.... don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?

WARNING: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.
Warranty
Please Note
Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
Saddle Warranty
asepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
Fiberglass Warranty
Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
A note about paint color matching, Please Read
Export Sales
USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty and applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.
Testimonials

Comments
Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them via THIS FORM.

Submit Photos:
Showcase your bike on Corbin.Com! Use this form to upload photos for possible inclusion on our website. Ready, set... LET'S SEE 'EM!

General Contacts
Corbin Europe
891 Christchurch Road
Bournemouth
Dorset
BH7 6AU
Telephone: +44 (01) 202 797254
email: sales@corbin-europe.com
There are no albums to display product

Corbin Super Motard Saddle

  • Brand: Corbin
  • Product Code: KTM-525-MOTARD
  • Availability: In Stock

Available Options

#KTM-525 - Dual Sport Saddle, KTM SX & EXC
£589.00

Related Products

Saddle Cream

Saddle Cream

To assure many years and untold miles of faithful service, be sure to care for your leather saddle w..

Corbin Ovalbac Backrest

Corbin Ovalbac Backrest

Our most popular backrest by far! If you've been admiring a Corbin backrest on your neighbor's or bu..

Standard Corbin Backrest

Standard Corbin Backrest

This model and the #02-SB Standard Ovalbac are our most popular backrests by far! If you've been adm..

Tags: Corbin Super Motard Saddle

Fibertech Basepan Fiberglass Warranty HD-FLH-9-PAD Ergonomic Shaping trunxbox Sissybar Pads 224 hd-box-1h Electric Heat HD-FLH-9-ARM Backrest System Integrated Molding Genuine leather Key lock installation streamliner1 RK-PAD Rumble Seat streamliner1 Color Matching Honda CRF250L Sissybar Pads 225 Sissybar Pads 210 hd-box