Just over 400 pounds... eight inches of suspension travel... 100 ponies... this bike is a grand time just waiting to happen. When you're having that much fun, who wants to stop? Perched on your new Corbin saddle, you won't need to until the fuel runs dry. 

We've built a wide, contoured seating platform in Dual Sport style to give you good mobility in the saddle combined with excellent support. Inside the saddle, our exclusive Comfort Cell foam provides a firm supportive ride that lasts. This exclusive foam material allows us to build a lower profile and still give you just the right amount of resilience. Firm enough to keep your body supported, but soft enough to cushion the ride. 

Designed "ergonomically" to fit the shape of your body. This concave shaping provides more square inches of body contact which creates better weight dispersion and helps to eliminate hot spots. Our rigid Fibertech basepan is designed to support the complex shaping of the foam and keep the carefully designed ergonomics intact. Our wider, sculpted seating helps to eliminate the centralized pressure created by the oem unit. 

Our unique materials and high density foam allow us to lower the seating platform without sacrificing comfort. Not only does this create better ground reach, but lowers your center of gravity for better handling. We've taken the seat height down to approximately 33" which is nearly a full inch improvement from the OEM unit. We've also kept a smooth transition up the tank to allow you to slide your body forward. 

On the outside we use only the finest materials available for unique looks and durability. The "Grabber" material shown has been discontinued, so we recommend Carbon-Fiber in it's place for good grip and custom looks. This gives a very custom look that is subtle and not visually overpowering. This combination along with the orange embroidered Corbin logo makes a great look on either the black bike or the orange bike.

Specs


Unique Technology

The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.

Fibertech™ Basepan

A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more...


Comfort Cell® Foam

The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort!


Ergonomic Shaping

A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.


Patented Manufacturing Technology

Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info

Accessories


Conditioner


Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. 
*More Info*


Apparel

We're often asked about tees and such so we caved in and had some Corbin gear made up. This is where you'll *Find It*


Ready for a Corbin seat inside your house? Auto styled couches and our classic chrome and leather barstools are a big hit for the man cave!
Check 'em Out *

Notes
Measurements

Seating area: 11" wide x 32" long 
Seat height: 33"

Installation

KTM-950SM-6


Installation is simple and uses your factory lock system for complete ease.


Brackets come premounted on the saddle so it's ready for immediate installation. Saddle secures in three places with a clip at the nose, steel tongue into the chassic and stainless steel latch pin at the rear.


This saddle Does Not fit the 950 SM R or the 950 Enduro models.


Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.... don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?

WARNING: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.
Warranty
Please Note
Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
Saddle Warranty
Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
Fiberglass Warranty
Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
A note about paint color matching, Please Read
Export Sales
USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty and applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.
Testimonials

Comments
Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them via THIS FORM.

Submit Photos:
Showcase your bike on Corbin.Com! Use this form to upload photos for possible inclusion on our website. Ready, set... LET'S SEE 'EM!

General Contacts
Corbin Europe
891 Christchurch Road
Bournemouth
Dorset
BH7 6AU
Telephone: +44 (01) 202 797254
email: sales@corbin-europe.com
There are no albums to display product

Corbin Super-Moto seat for 2006 - 2007 KTM 950 SM

  • Brand: Corbin
  • Product Code: KTM-950SM-6
  • Availability: In Stock

Available Options

#KTM-950SM-6 - Super-Moto Saddle for 2006-2007 KTM 950SM
£589.00

Related Products

Saddle Cream

Saddle Cream

To assure many years and untold miles of faithful service, be sure to care for your leather saddle w..

Tags: Corbin Super-Moto seat for 2006 - 2007 KTM 950 SM

Fibertech Basepan Fiberglass Warranty HD-FLH-9-PAD Ergonomic Shaping trunxbox Sissybar Pads 224 hd-box-1h Electric Heat HD-FLH-9-ARM Backrest System Integrated Molding Genuine leather Key lock installation streamliner1 RK-PAD Rumble Seat streamliner1 Color Matching Honda CRF250L Sissybar Pads 225 Sissybar Pads 210 hd-box