Leave it to Honda to come up with the first Crossover motorcycle! Well, it didn't take the early adopters long to figure out a little comfort injection was needed for the DN-01. For all of its technical prowess and unique bodywork, the good folks at Big Red left a bit to be desired when it comes to the rump rest. Fortunately, we knew just what to do about that!

As usual, we start completely from scratch and create a basepan with our exclusive Fibertech base material that allows a perfect fit to every arc and contour of the DN-01 bodywork while being rigid enough to support the carefully designed foam shape. Fibertech also provides the structural integrity needed for our internal backrest support system.

Then we developed a concave seating surface that conforms to the shape of your body and eliminates pressure points. This spreads body weight over a greater area giving more square inches of body contact and support. Additionally, both positions are neutralized to curb sliding which reduces rider fatigue. As you can tell, this ergonomically designed shape provides a very nice visual effect that flows with the bike's sleek lines.

Corbin backrests (optional) are designed to install easily and lock in place with a single bolt. Built in angle adjustment allows our backrests to be tailored to your riding posture quickly and easily. Special hardware in the front position allows an extra adjustment to position the backrest fore-aft and provides spring loaded fold down functionality. Use a single backrest to transfer front to rear as needed, or order two backrests for full time use. Choose from a variety of backrest styles to suit your taste (we recommend Ovalback #02-SB as shown above). The design of this system actually has the rear seat providing backrest support for BOTH seating positions.

Naturally, Corbin backrests are tailored to match your new Corbin saddle and provide an integrated look. Models like the #02-SB provide contoured support and maximum amount of body support. These models also offer finishing plate options to further customize the look of your bike. Backrests come standard with a leather look ABS finishing plate that can be ordered custom in a variety of styles... even chrome or painted gloss black for a little extra.

For an added bit of luxury, we've designed the front and rear saddles with the option of electric heat! Simple to install with all components built into the saddles. You just have to install a simple wiring pigtail on your bike and enjoy the warmth. A great feature to have when you're taking off early in the morning to beat the traffic! Convenient switches are located on the left side of the saddle. Once on, the saddle will warm up and maintain temperature automatically though an integrated controller. Both front and rear seats are available heated (or non-heated) and have separate switches to control them.

Saddles use our exclusive high-density Comfort Cell foam that allows us to build a supportive saddle without a bulky shape. Corbin's Wizards are masters at combining form and function into a saddle that makes you as happy to look at as it does to ride on. On top, we include genuine leather seating in your choice of colors and styles. Shown here we use our standard natural grain black leather in the seating with Asphalt vinyl sides and Carbonium nose band. These choices provide a nice subtle bit of detail to the bike that coordinates with the bike.

Simple installation with all required brackets and hardware included. If you opt for heated seating, you need only integrate the supplied wiring pigtail with your fusebox and you'll be ready to roll. Complete instructions included. Please note, Corbin's front and rear seats will NOT integrate with stock front and rear seats.

Want to add some locking storage? Corbin's glovebox is an excellent solution for all your quick-access stuff. Simply replace the finishing plate on the Ovalbac model backrest and you've just added four liters of locking storage capacity. It's plenty for a couple bottles of water, cell phone, spare gloves, maps and other incidentals. Constructed of durable ABS plastic and available plain black or prepainted (at additional cost). Check out the optional Glovebox via the Accessories tab.

Specs



Unique Technology

The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.



Fibertech™ Basepan

A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more...



Comfort Cell® Foam

The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort!



Ergonomic Shaping

A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.



Patented Manufacturing Technology

Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info



Genuine Leather

We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.



Corbin Backrest System

The first and most versatile removable backrest system available for motorcycles! Corbin's backrests provide added vertical back support and long range comfort. Supported by internal hardware for a very clean look. Backrests adjust to rider's profile for a tailored fit and install or remove easily as desired. A very popular option! Click the button for additional info...




Electric Heat

As an option we can include electric heat in this saddle! This option provides a true bit of luxury for when the temperature starts to drop. Simple to install with major components pre-built into the saddle. Just wire in the included pigtail and you're ready to roll. Click the button at left for complete info...


Warning! Heater elements should never be installed in motorcycle seats used by riders that cannot sense heat.
Accessories


Conditioner


Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. 
*More Info*


Apparel

We're often asked about tees and such so we caved in and had some Corbin gear made up. This is where you'll *Find It*


Ready for a Corbin seat inside your house? Auto styled couches and our classic chrome and leather barstools are a big hit for the man cave!
Check 'em Out *

Notes
Measurements

Rider seating: 15.5" wide x 13" long
Back Support: 6"
Passenger seating: 12" wide x 13" long

Installation

Instructions: H-DN01-F (-E) & H-DN01-R (-E)



Front seat installs just like stock with two tongues at the front and two tabs at the rear. Rear tabs bolt to stock locations on the bike. We include new bolts to use in the rear tabs.


Passenger seat mounts just like stock and includes brackets preinstalled on the saddle. Meshes with OEM key lock system.


NOTE: Due to the incorporation of backrest hardware, Corbin's front and rear saddles do NOT integrate with stock components. Front and Rear seats are available separately to allow you to choose heated or non-heated for each.



Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.... don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?



WARNING: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.
Warranty
Please Note
Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
Saddle Warranty
Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
Fiberglass Warranty
Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number. A note about paint color matching, Please Read
Export Sales
USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.

Write a review

Note: HTML is not translated!
    Bad           Good

Front & Rear saddles for 2009-2012 Honda DN-01

  • Brand: Corbin
  • Product Code: H-DN01-F
  • Availability: In Stock
  • £0.00


Available Options


Related Products

Saddle Cream

Saddle Cream

To assure many years and untold miles of faithful service, be sure to care for your leather saddle w..

£0.00

Tags: Corbin Europe Seats for Honda Motorcycles

Fibertech Basepan Fiberglass Warranty HD-FLH-9-PAD Ergonomic Shaping trunxbox Sissybar Pads 224 hd-box-1h Electric Heat HD-FLH-9-ARM Backrest System Integrated Molding Genuine leather Key lock installation streamliner1 RK-PAD Rumble Seat streamliner1 Color Matching Honda CRF250L Sissybar Pads 225 Sissybar Pads 210 hd-box