Classic solo is designed to provide maximum rider comfort combined with a nostalgic look appropriate to the Rocker. Allows use of our removable rider's backrest for 13 inches of vertical back support (seat & backrest combined). Our sculpted seating position gives maximized body contact and provides touring quality support. Neutralized seat platform offers an easier reach to the ground and a more ergonomic position on the bike. 

Corbin's optional removable rider backrest is simple to install and adjusts easily to your riding posture. Slide the backrest shaft into the internal hardware of the Corbin Solo and lock it in place with a single bolt. You can then set the backrest position to your preferred angle and lock it in place with the easily accessible adjustment screw... no need to remove the saddle to accomplish this. Choose from a variety of backrest styles to suit your taste. We recommend the #02-S Ovalbac (shown) for best combination of looks and support. 

Saddle is built up with Corbin's exclusive Comfort Cell foam material for a firm supportive bucket that lasts. Built nearly twice as firm as the stock foam material so your body doesn't sink through the foam and create hot spots. Bucket design spreads weight evenly to support your body from the sides and eliminate centralized pressure. Comfort Cell also breaks in over over the miles to adapt to your body and provide a custom fit to your profile. 

Classic Solo saddle is tastefully designed to fit perfect to the tank and chassis for a very clean look. Ergonomic shape provides a clean appearance with a flowing line and integrated skirts to conceal the installation points. Built on our Fibertech base material that provides the structural strength for the integrated backrest system and to support the carefully designed foam shape. 

NOTE: Because of the added structural strength required for the backrest support system, we include a set of hardened steel bolts and lock washers for saddle installation. Do not reuse the oem hardware when installing the Corbin solo saddle! 

On the outside, Corbin's Classic solo uses genuine leather in the seating panels for a luxurious perch that breathes with your body. On the model shown here we've used our standard natural grain leather seating with black faux-ostrich center trim, natural black sides and Asphalt skirts for added contrast. If you prefer something a bit flashier, we also offer grey faux-snake center trim or plain black to keep it subtle. For a clean appearance from the rear, we include a molded ABS cover under the seat with a ribbed design that coordinates nicely. 

Leather seating will break in along with the foam shape for a personalized fit. Be sure to care for your leather saddle with a quality conditioner like our Saddle Cream. With proper care, your seat will age gracefully developing a unique character and will be your riding buddy for years. 

If you would like to add a bit of storage to your Rocker, check out the Corbin Glovebox. Bolting onto your #02-S Corbin backrest in place of a finishing plate to provide convenient locking storage. Sized just ride to keep all your essentials like cell phone, maps, water bottles and spare gloves. Available in unfinished ABS (black) or prepainted gloss black for a little extra. Comes fully lined with a locking door to secure your gear. For complete info, just check out our Accessories 
Specs




Unique Technology

The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.




Fibertech™ Basepan

A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more...




Comfort Cell® Foam

The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort!




Ergonomic Shaping

A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.




Patented Manufacturing Technology

Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info




Genuine Leather

We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.



Corbin Backrest System

The first and most versatile removable backrest system available for motorcycles! Corbin's backrests provide added vertical back support and long range comfort. Supported by internal hardware for a very clean look. Backrests adjust to rider's profile for a tailored fit and install or remove easily as desired. A very popular option! Click the button for additional info...

Accessories


Conditioner


Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. 
*More Info*


Apparel

We're often asked about tees and such so we caved in and had some Corbin gear made up. This is where you'll *Find It*


Ready for a Corbin seat inside your house? Auto styled couches and our classic chrome and leather barstools are a big hit for the man cave!
Check 'em Out *

Notes

Measurements

Classic Solo seating: 14" wide x 13" long 
Back support: 4" w/o backrest, 13" with #02-S backrest 
Approx. Seat height: 24.5"




Corbin Classic Solo saddle has been redesigned to work with Harley-Davidson saddlebags installed.


Installation Instructions: Page 1 


Installation: Corbin's Classic Solo mounts easily to your bike very much like stock. Slide the saddle into place nose first securing the mounting tongue and lower onto the chassis. Secure with included bolts and washers under the decorative seat skirt.


Due to the added stress of the rider backrest system, we have included a set of hardened steel bolts to replace the stock hardware used for seat installation. To assure your safety, use ONLY the included hardware when installing the Corbin solo saddle.




Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.... don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?



WARNING: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.
Warranty
Please Note
Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
Saddle Warranty
Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
Fiberglass Warranty
Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number. A note about paint color matching, Please Read
Export Sales
USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.
Testimonials

Comments
Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them via THIS FORM.

Submit Photos:
Showcase your bike on Corbin.Com! Use this form to upload photos for possible inclusion on our website. Ready, set... LET'S SEE 'EM!

General Contacts
Corbin Europe
891 Christchurch Road
Bournemouth
Dorset
BH7 6AU
Telephone: +44 (01) 202 797254
email: sales@corbin-europe.com
There are no albums to display product

Classic Solo for 2008-2011 H-D Softail Rocker FXCW & FXCWC

  • Brand: Corbin
  • Product Code: HD-ST8-ROK-S
  • Availability: In Stock

Available Options

#HD-ST8-ROK-S - Classic Solo, 2008-2011 Rocker
£589.00
#02-SB - Ovalbac Standard Backrest (each)
£316.00

Tags: Classic Solo for 2008-2011 H-D Softail Rocker FXCW & FXCWC

Fibertech Basepan Fiberglass Warranty HD-FLH-9-PAD Ergonomic Shaping trunxbox Sissybar Pads 224 hd-box-1h Electric Heat HD-FLH-9-ARM Backrest System Integrated Molding Genuine leather Key lock installation streamliner1 RK-PAD Rumble Seat streamliner1 Color Matching Honda CRF250L Sissybar Pads 225 Sissybar Pads 210 hd-box