Wide, ergonomically shaped seating buckets provide excellent weight distribution for a high level of comfort and support on your Urban Mobility Vehicle. Designed to provide great lower back support and works with our optional backrests in both the rider and passenger seating positions. With backrests installed, the saddle provides 17" of vertical support up front and 10" for your passenger. 

Our sculpted seating positions give more square inches of body contact to eliminate hot spots and relieve centralized pressure that transfers to your tailbone. We've kept good ground reach by keeping width narrow at the nose area. Seating positions are neutralized to provide a relaxed riding posture that minimizes sliding in the saddle. 

Corbin backrests are simple to install and adjust easily to your riding posture. Just slide the backrest shaft into the internal hardware and lock it in place with a single bolt. You can then set the backrest angle to your preferred setting and lock it in with the easily accessible adjustment screw. Choose from a variety of backrest styles to suit your taste. We recommend the #02-S Ovalbac shown here for a good combination of looks and support. 

To supply total comfort, Corbin backrests are sculpted just like the saddle to provide an ergonomic fit to your body and give you support without pressure points. 

Seat and backrest are built up with our exclusive Comfort Cell® foam. Comfort Cell® is firmer than stock foam so it offers long lasting support. This closed cell foam retains resilience indefinitely and will actually break in to take on your shape as the miles roll by. Under the foam our rigid Fibertech basepan is specially designed to support the foam shape and fit perfectly to every contour of your bike. 

For an added level of luxury, the Corbin saddle offers electric heaters in both the rider and passenger seating positions. Rider heat is controlled via the stock BMW controls while passenger seat has switch conveniently located on the side. Perfect for those chilly morning rides. 

Genuine leather seating is included with your choice of colors and style. Leather is a great seating surface for saddles because it is a natural product that will breathe and not trap too much heat against your body. It will also break in along with the foam shape and provide a personalized fit. Just be sure to care for it properly with a quality conditioner like our Saddle Cream. This will help your seat to remain weather resistant and age gracefully while it develops its own unique character (just like a leather jacket). 

Corbin backrests offer a choice of rear finishing plates to customize the look even further. We have a leather look, carbon-fiber look or paintable model. If you'd like to add a little more storage, the finishing plate can be replaced with our unique glovebox that adds four liters of locking storage to your C650. Perfect for keys, cell phones, bottled water and other incidentals. For more info, click on the Accessories tab. 

Installs onto your stock BMW hinge and latches like stock. Due to the rigid basepan and internal backrest support hardware, the Corbin saddle is heavier than the stock seat but the BMW strut still holds the seat in position when open. Seat heater plugs into existing wiring on your bike.

Specs


Unique Technology

The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.

Fibertech™ Basepan

A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more...


Comfort Cell® Foam

The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort!


Ergonomic Shaping

A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.


Patented Manufacturing Technology

Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info


Genuine Leather

We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.


Corbin Backrest System

The first and most versatile removable backrest system available for motorcycles! Corbin's backrests provide added vertical back support and long range comfort. Supported by internal hardware for a very clean look. Backrests adjust to rider's profile for a tailored fit and install or remove easily as desired. A very popular option! Click the button for additional info...


Electric Heat

As an option we can include electric heat in this saddle! This option provides a true bit of luxury for when the temperature starts to drop. Simple to install with major components pre-built into the saddle. Just wire in the included pigtail and you're ready to roll. Click the button at left for complete info...


Warning! Heater elements should never be installed in motorcycle seats used by riders that cannot sense heat.
Accessories


Conditioner


Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. 
*More Info*


Apparel

We're often asked about tees and such so we caved in and had some Corbin gear made up. This is where you'll *Find It*


Ready for a Corbin seat inside your house? Auto styled couches and our classic chrome and leather barstools are a big hit for the man cave!
Check 'em Out *

Notes
Measurements

Rider seating: 15.5" wide x 16" long x 7" deep
Rear area: 14.5" wide x 15" long
Approx seat height: 32"

Installation

#BMW-C650GT-12


Corbin saddle mounts like stock and is designed to work with the factory hinge and key lock. Latch bracket is included and comes preinstalled on the seat.


Electric seat heater is desgined to plug into the existing wiring on your BMW for simple installation.


Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.... don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?

WARNING: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.
Warranty
Please Note
Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
Saddle Warranty
Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
Fiberglass Warranty
Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
A note about paint color matching, Please Read
Export Sales
USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty and applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.

Write a review

Note: HTML is not translated!
    Bad           Good

Dual Saddle for 2012 - 2013 BMW C650 GT

  • Brand: Corbin
  • Product Code: BMW-C650GT-12-E
  • Availability: In Stock
  • £0.00


Available Options


Related Products

Saddle Cream

Saddle Cream

To assure many years and untold miles of faithful service, be sure to care for your leather saddle w..

£0.00

Tags: Dual Saddle for 2012 - 2013 BMW C650 GT

Fibertech Basepan Fiberglass Warranty HD-FLH-9-PAD Ergonomic Shaping trunxbox Sissybar Pads 224 hd-box-1h Electric Heat HD-FLH-9-ARM Backrest System Integrated Molding Genuine leather Key lock installation streamliner1 RK-PAD Rumble Seat streamliner1 Color Matching Honda CRF250L Sissybar Pads 225 Sissybar Pads 210 hd-box