Corbin's touring package provides comfort worthy of this long legged machine. Ergonomically designed seating gives better weight distribution for miles of comfort. Neutralized platforms curb the tendency to slide in the saddle to reduce fatigue and increase your riding range.

Both front and rear saddles work with our removable backrest system. Corbin backrests install easily into hardware concealed inside the saddle and lock in with a single bolt. Naturally they're adjustable to provide a tailored fit to your profile. Since they're so easy to use, you can order a single backrest and transfer it front to rear as needed or get two for full time use. Corbin backrests are available in a variety of styles to suit your taste.

All components are built up with our exclusive Comort Cell foam for a firm, supportive ride that lasts. Combined with the sculpted shaping of the seats, our foam will support you in comfort for miles of enjoyment. Over time, Comfort Cell will break in and actually begin to take on your shape for a personalized fit.

Saddles and backrests include genuine leather seating in your choice of colors and styles. Leather provides a perch that breathes with your body for a luxurious ride. Leather is extremely durable and will adapt with the foam to conform to the personalized shape. Just be sure to care for it properly with a good leather conditioner like our Saddle Cream.

Corbin's RT saddle setup is available with the option of electric seat heaters. This luxurious option comes fully integrated into the saddle for simple use and is activated with a switch located on the side of the saddle. Just integrate the wiring pigtail with your BMW harness and enjoy the warmth. When flipped on, heat is controlled and maintained automatically via the built in controller.

Designed to fit perfectly and look custom made for your RT. Corbin's saddle components work equally well with or without the BMW saddlebags mounted on the machine. Front saddle adjustability is retained and works in any of the three positions. If you opt for a trunk on your RT, we can also make a trunkrest pad for your passenger that keeps a coordinated look with your Corbin seat.


Unique Technology

The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.

Fibertech™ Basepan

A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more...

Comfort Cell® Foam

The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort!

Ergonomic Shaping

A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.

Patented Manufacturing Technology

Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info

Genuine Leather

We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.

Corbin Backrest System

The first and most versatile removable backrest system available for motorcycles! Corbin's backrests provide added vertical back support and long range comfort. Supported by internal hardware for a very clean look. Backrests adjust to rider's profile for a tailored fit and install or remove easily as desired. A very popular option! Click the button for additional info...

Electric Heat

As an option we can include electric heat in this saddle! This option provides a true bit of luxury for when the temperature starts to drop. Simple to install with major components pre-built into the saddle. Just wire in the included pigtail and you're ready to roll. Click the button at left for complete info...

Warning! Heater elements should never be installed in motorcycle seats used by riders that cannot sense heat.



Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. 
*More Info*


We're often asked about tees and such so we caved in and had some Corbin gear made up. This is where you'll *Find It*

Ready for a Corbin seat inside your house? Auto styled couches and our classic chrome and leather barstools are a big hit for the man cave!
Check 'em Out *


Rider Seating: 15" wide x 15.5" long
Passenger: 14" wide x 9" long

Installation Instructions:
Front and Rear Saddles - 
Page 1
Front and Rear Heater - 
Page 1

Simple installation, Corbin components install just like stock with all hardware in place on the saddle. Although the system appears different, it works just like your stock seat.

Due to the seats ability to sit in either of the three height positions, when used in the lowest position, it will leave a small gap between the nose of the saddle and the tank. This was necessary in order to improve the ergonomic shaping of the saddle.

On this saddle model, the heater switch is located on the RIGHT side of the motorcycle.

In some cases getting seat to lock in the high position can be a challenge until the rubber bumpers break in a little. To ease this while the seat is new, you can shim up the rear mounting tab on the front seat with a couple of washers. This will allow the rear seat to move forward easier and lock into place

Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.... don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?

WARNING: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.
Please Note
Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
Saddle Warranty
Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
Fiberglass Warranty
Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
A note about paint color matching, Please Read
Export Sales
USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty and applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.

Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them via THIS FORM.

Submit Photos:
Showcase your bike on Corbin.Com! Use this form to upload photos for possible inclusion on our website. Ready, set... LET'S SEE 'EM!

General Contacts
Corbin Europe
891 Christchurch Road
Telephone: +44 (01) 202 797254
There are no albums to display product

1996 - 2004 BMW R1100 RT & R1150 RT

  • Brand: Corbin
  • Product Code: R11RT-FR
  • Availability: In Stock

Available Options

#R11RT-FR - Front & Rear Saddle set
#R11RT-TR - Coordinated Trunkrest
#297-SB - Standard Leather Backrest (each)

Related Products

Saddle Cream

Saddle Cream

To assure many years and untold miles of faithful service, be sure to care for your leather saddle w..

Corbin Ovalbac Backrest

Corbin Ovalbac Backrest

Our most popular backrest by far! If you've been admiring a Corbin backrest on your neighbor's or bu..

Standard Corbin Backrest

Standard Corbin Backrest

This model and the #02-SB Standard Ovalbac are our most popular backrests by far! If you've been adm..

Tags: 1996 - 2004 BMW R1100 RT & R1150 RT

Fibertech Basepan Fiberglass Warranty HD-FLH-9-PAD Ergonomic Shaping trunxbox Sissybar Pads 224 hd-box-1h Electric Heat HD-FLH-9-ARM Backrest System Integrated Molding Genuine leather Key lock installation streamliner1 RK-PAD Rumble Seat streamliner1 Color Matching Honda CRF250L Sissybar Pads 225 Sissybar Pads 210 hd-box