Versatility, comfort and style combined in one simple to install package. 

Large, ergonomically shaped seating buckets provide excellent weight distribution for a high level of comfort and support. Designed to provide good lower back support and a roomier ride for taller drivers. 

Seat is built up with our exclusive Comfort Cell® foam. Comfort Cell® is nearly twice as firm as the stock foam so it offers long lasting support. This closed cell foam retains resilience indefinitely and will actually break in to take on your shape as the miles roll by. Under the foam our rigid Fibertech basepan is specially designed to support the foam shape and fit perfectly to every contour of your bike. 

Genuine leather seating is included with your choice of colors and style. Leather is a great seating surface for saddles because it is a natural product that will breathe and not trap too much heat against your body. It will also break in along with the foam shape and provide a personalized fit. Just be sure to care for it properly with a quality conditioner like our Saddle Cream. This will help your seat to remain weather resistant and age gracefully while it develops its own unique character (just like a leather jacket). 

Shown above we used Natural Grain Black leather seating, Asphalt sides, Silver Carbon-Fiber welts and Light Silver Rocker Block stitch. This provides a nice, custom touch that doesn't overpower the look of the bike. 

Installs onto your stock Yamaha hinge and uses a rear bracket that integrates with the OEM key lock. Due to the rigid basepan, the Corbin saddle is heavier than the stock seat. In most cases the OEM spring will have enough tension to keep the Corbin saddle in the lifted position when needed. 

Our main feedback from the S Max community was there needed to be more room for taller folks on this bike. We aim to please so we've pushed the seating a little further back and optimized it for a wide range of rider statures. To do this we had to take out some of the hump built into the basepan and that effects your storage bay. We were still able to put a full face Arai in there but it was close. Some full face helmets may no longer fit.
Specs



Unique Technology

The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.



Fibertech™ Basepan

A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more...



Comfort Cell® Foam

The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort!



Ergonomic Shaping

A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.



Patented Manufacturing Technology

Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info



Genuine Leather

We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.

Accessories


Conditioner


Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. 
*More Info*


Apparel

We're often asked about tees and such so we caved in and had some Corbin gear made up. This is where you'll *Find It*


Ready for a Corbin seat inside your house? Auto styled couches and our classic chrome and leather barstools are a big hit for the man cave!
Check 'em Out *

Notes
Measurements

Rider seating: 16" wide x 16" long x 6" deep
Rear area: 12" wide x 12" long
Approx seat height: 32"

Installation
*Online Soon*



Saddle mounts like stock and integrates with the OEM hinge and key lock system. Latch loop is included and comes preinstalled on the saddle.


Corbin saddle comes with heavy duty weather stripping installed on the basepan to create a good seal for your storage compartment.



Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.... don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?



WARNING: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.
Warranty
Please Note
Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
Saddle Warranty
Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
Fiberglass Warranty
Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number. A note about paint color matching, Please Read
Export Sales
USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.
Testimonials

Comments
Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them via THIS FORM.

Submit Photos:
Showcase your bike on Corbin.Com! Use this form to upload photos for possible inclusion on our website. Ready, set... LET'S SEE 'EM!

General Contacts
Corbin Europe
891 Christchurch Road
Bournemouth
Dorset
BH7 6AU
Telephone: +44 (01) 202 797254
email: sales@corbin-europe.com
There are no albums to display product

Dual Saddle for 2016-2017 Yamaha S Max

  • Brand: Corbin
  • Product Code: Y-S-MAX
  • Availability: In Stock

Available Options

#Y-S-MAX - Dual Saddle for Yamaha S Max
£641.00
#02-SB - Ovalbac Standard Backrest (each)
£316.00

Related Products

Saddle Cream

Saddle Cream

To assure many years and untold miles of faithful service, be sure to care for your leather saddle w..

Corbin Ovalbac Backrest

Corbin Ovalbac Backrest

Our most popular backrest by far! If you've been admiring a Corbin backrest on your neighbor's or bu..

Standard Corbin Backrest

Standard Corbin Backrest

This model and the #02-SB Standard Ovalbac are our most popular backrests by far! If you've been adm..

Tags: Yamaha S Max, corbin europe, yamaha, Dual Saddle for 2016-2017 Yamaha S Max

Fibertech Basepan Fiberglass Warranty HD-FLH-9-PAD Ergonomic Shaping trunxbox Sissybar Pads 224 hd-box-1h Electric Heat HD-FLH-9-ARM Backrest System Integrated Molding Genuine leather Key lock installation streamliner1 RK-PAD Rumble Seat streamliner1 Color Matching Honda CRF250L Sissybar Pads 225 Sissybar Pads 210 hd-box