We do not always have a color match for all brands and model. Please enter your bike year and paint color below and we will contact you if we do not currently have the color matched.
A note about paint color matching:  Please Read

We're always bragging about how our R&D department can design products that visually fit the lines of the bike. Take a look at this setup and you'll see why! Notice how well they were shaped to emulate the tank and fender for total integration. This makes it hard to tell where the Victory stops and the Corbin starts! 

We've taken over 30 liters of storage and smoothed out the lines to visually blend the saddlebags into the Jackpot fender. The esthetics camouflage the generous capacity of the bags and look clean. Typical of Corbin engineering, the interior wall of the bag molds close to the profile of the bike to fit closer to the centerline than any other saddlebag made. This provides better load bearing, better balance, less width and a much cleaner look. 

Corbin saddlebags are tooled up specially for each bike model so they fit perfect. Both bags feature top loading so contents can't spill out when opened and they will self close in the wind if forgotten. Notice how the Corbin mounting system keeps the bags close to the bike. We mold them around the fender rails and in tight to the fender. This allows the bags to carry weight in close for a better center of gravity and when loaded properly the bike remains stable at all speeds. This design also keeps a narrower profile for less width to worry about when lane splitting. 

Fleetliner saddlebags are designed to work with the Corbin Streamliner trunk setup for even more storage. We've created clearance in the fender strut area to allow room for the bracket kit and include painted plugs for when you don't have the trunk installed. 

Our design team shaped these bags to work with your stock exhaust system, but they will work equally well with any system that has a profile lower than the stock pipe. Fleetliner Bags fit perfect and install simply with all brackets included. In the front, our bags are shaped to allow room for passengers legs on the rear footpegs and includes a heel pad to protect the saddlebag finish. 

Both bags come completely lined to protect your cargo and feature locking doors for security. The Fleetliner saddlebag set comes prepainted to coordinate with your stock paint job and includes the triple chrome strips on the sides. We make them available in either a single color to coordinate with your OEM color or with pre-painted "Extreme Graphics" as shown on this bike. Heel pad comes standard with Asphalt material that is extremely durable and looks appropriate.

Saddlebag Interior
Corbin Fleetliner bags come fully lined with a nice, thick grey liner on the inside to protect your cargo. Sure seal weather stripping around the doors keeps out the elements. Locking doors keep contents secure.
Fibertech Construction
Manufactured of our exclusive Fibertech™ material for durability and a clean finish. Specially formulated for Corbin, Fibertech™ gives us very tight tolerances with minimal shrinkage so each part comes out true to the original design.
We use a quality gel-coat for a nice finish that doesn't show material weave. When ordering parts in "primer gel-coat" you can expect a part ready for your painter's preparation. Most Corbin components are also available prepainted and ready for immediate installation.


Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. 
*More Info*


We're often asked about tees and such so we caved in and had some Corbin gear made up. This is where you'll *Find It*

Ready for a Corbin seat inside your house? Auto styled couches and our classic chrome and leather barstools are a big hit for the man cave!
Check 'em Out *


Saddlebag Capacity: 30+ liters per side
Overall width: 34 inches
Saddlebag opening: 8" x 14.5"



Installation is simple using hardware and brackets that are included. Corbin bags are designed to work with your stock turn signals so there is no wiring to worry about. Suitable for an average weekend mechanic, complete instructions included.

When loading items inside the bags, it is best to load heavy items closest to the bike for best load bearing and balance. It is important to load items like disk locks carefully. If you throw an item like this into one of the bags, it can create pressure cracks in the paint on the outside of the bag

Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.... don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?

WARNING: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.
Please Note
Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
Saddle Warranty
Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
Fiberglass Warranty
Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number. A note about paint color matching, Please Read
Export Sales
USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.

Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them via THIS FORM.

Submit Photos:
Showcase your bike on Corbin.Com! Use this form to upload photos for possible inclusion on our website. Ready, set... LET'S SEE 'EM!

General Contacts
Corbin Europe
891 Christchurch Road
Telephone: +44 (01) 202 797254
email: sales@corbin-europe.com
There are no albums to display product

Fleetliner Saddlebags for Victory Vegas Jackpot

  • Brand: Corbin
  • Product Code: V-JPOT-6-BAG
  • Availability: In Stock

Available Options

#V-JPOT-6-BAG - Saddlebag set, single color
#V-JPOT-6-BAG-B - Saddlebag set, Extreme Graphics

Related Products

Saddle Cream

Saddle Cream

To assure many years and untold miles of faithful service, be sure to care for your leather saddle w..



The seat-tab thumbscrew makes installing and removing your saddle a snap. NEW single piece..



A Corbin hat is the best solution for your helmet-hair problem! Adjustable back style in medium heig..

Tags: Fleetliner Saddlebags for Victory Vegas Jackpot

Fibertech Basepan Fiberglass Warranty HD-FLH-9-PAD Ergonomic Shaping trunxbox Sissybar Pads 224 hd-box-1h Electric Heat HD-FLH-9-ARM Backrest System Integrated Molding Genuine leather Key lock installation streamliner1 RK-PAD Rumble Seat streamliner1 Color Matching Honda CRF250L Sissybar Pads 225 Sissybar Pads 210 hd-box