Corbin has a long history of designing saddles that look as well as they perform and the Hammer Dual Tour is no exception. This saddles offers incredible comfort gains that look good on the bike. Notice how well the saddle fits to the tank and fender groove and provides two large seating buckets that don't overpower the bike visually. We sculpt each seating area for proper weight distribution and allow long range capability. Generously contoured platforms eliminate hot spots and centralized pressure that causes discomfort. On the inside, our exclusive Comfort Cell® foam material gives firm support that conforms to your body. 

The Dual Touring Saddle accepts two removable rider's backrests for added back support. Our backrests are fully adjustable to provide a tailored fit to individual's posture. Support hardware is internal to the saddle to keep a clean look without external contraptions. In the front, we've engineered a second adjustment that allows the position of the rest to be adjusted fore/aft. This special hardware also allows the backrest to fold down to ease mounting the bike. 

You can use a single backrest that transfers front to back as needed or get two backrests for full time use. Simply slide the backrest shaft into the built in hardware and secure it in place with the provided setscrew. Saddle must be removed in order to set the safety screw in the passenger backrest. Once the backrest is installed, all adjustments can be performed without removing the saddle. Like the saddle, Corbin backrests and sissy bar pads are shaped to fit the curve of your body for a better fit and greater comfort. 

The ergonomic design of the Dual Touring saddle also gives a nice flowing shape on the bike for a clean look. Inside the saddle, Corbin's Comfort Cell® foam provides a nice firm perch that supports your body indefinitely and doesn't cave in like softer materials. Comfort Cell Cell® feels firm when you first ride on it, but it is this support that gives you daylong comfort. Notice also, the amount of vertical support offered by the bucket design of the Corbin saddle... over 7" of vertical support or 17" with the backrest installed! 

We use genuine leather seating panels for a luxurious ride that breathes with your body. Leather is extremely durable and will break in along with the foam shape to conform to your body. Saddle comes standard in all plain black for a look as tough as the bike itself. Be sure to care for your leather saddle properly with a quality conditioner like our Saddle Cream. This will help the hied to resist the elements and remain supple. The leather seating will conform along with the foam shape and provide a personalized fit to your posterior. Over time, your leather saddle will develop its own unique character just like your leather jacket does. 

Corbin's Ovalbac backrest design (shown) has removable finishing plates on the rear that gives you a nice customizing option. Backrests come standard with an ABS plate that gives a leather look, but are also available in a Carbon Fiber or Aluminum look or even primer for custom painting. For a little extra, we can even supply a backing plate that is pre-painted gloss black or even chrome. 

If you're looking to add a little storage space to your Hammer how about a cool new glovebox for the rear of your Ovalbac backrest (#02-S only). Designed to carry four liters of your essential stuff like cell phones, spare gloves, bottled water, maps and sunglasses. Constructed of durable ABS and painted gloss black for a perfect finish. You can leave this mounted on your backrest full time or swap it with a regular finishing plate as needed. Installation is just two screws! Comes fully lined and weather stripped with two keys.

Specs



Unique Technology

The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.



Fibertech™ Basepan

A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more...



Comfort Cell® Foam

The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort!



Ergonomic Shaping

A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.



Patented Manufacturing Technology

Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info



Genuine Leather

We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.



Corbin Backrest System

The first and most versatile removable backrest system available for motorcycles! Corbin's backrests provide added vertical back support and long range comfort. Supported by internal hardware for a very clean look. Backrests adjust to rider's profile for a tailored fit and install or remove easily as desired. A very popular option! Click the button for additional info...

Accessories


Conditioner


Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. 
*More Info*


Apparel

We're often asked about tees and such so we caved in and had some Corbin gear made up. This is where you'll *Find It*


Ready for a Corbin seat inside your house? Auto styled couches and our classic chrome and leather barstools are a big hit for the man cave!
Check 'em Out *

Notes
Measurements

Rider Seating: 14" wide x 15" long x 7" deep 
Depth w/ backrest: 17" 
Passenger: 12.5" wide x 11" long

Installation

[Page 1]

Dual Touring saddle installs easily on your bike using existing positions on your bike. All installation hardware is include so your new saddle is ready to go right out of the box.



First install the provided mounting tabs into the fender as shown. Use a little locktite on each bolt and tighten to 8 ft lbs.


Now slide the saddle into position with the tongue in front going into your chassis near the ignition box. Notice we do NOT use the rubber holder on top of the chassis. Lower the rear of the saddle into place and secure to the previously installed brackets. There is a small skirt on the saddle's side to allow access to these bolts. Tighten to 8 ft lbs.



Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.... don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?



WARNING: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.
Warranty
Please Note
Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
Saddle Warranty
Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
Fiberglass Warranty
Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number. A note about paint color matching, Please Read
Export Sales
USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.
Testimonials

Comments
Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them via THIS FORM.

Submit Photos:
Showcase your bike on Corbin.Com! Use this form to upload photos for possible inclusion on our website. Ready, set... LET'S SEE 'EM!

General Contacts
Corbin Europe
891 Christchurch Road
Bournemouth
Dorset
BH7 6AU
Telephone: +44 (01) 202 797254
email: sales@corbin-europe.com

Date: 01/05/2017

By: Sebastian Sebastian

Dual Touring Saddle for Victory Hammer

  • Brand: Corbin
  • Product Code: V-HAM-DT
  • Availability: In Stock

Available Options

#V-HAM-DT - Dual Touring Saddle
£641.00
#02-SB - Ovalbac Standard Backrest (each)
£316.00

Related Products

Saddle Cream

Saddle Cream

To assure many years and untold miles of faithful service, be sure to care for your leather saddle w..

Thumbscrews

Thumbscrews

The seat-tab thumbscrew makes installing and removing your saddle a snap. NEW single piece..

Ballcap

Ballcap

A Corbin hat is the best solution for your helmet-hair problem! Adjustable back style in medium heig..

Tags: Corbin Europe Seats for Victory Motorcycles

Fibertech Basepan Fiberglass Warranty HD-FLH-9-PAD Ergonomic Shaping trunxbox Sissybar Pads 224 hd-box-1h Electric Heat HD-FLH-9-ARM Backrest System Integrated Molding Genuine leather Key lock installation streamliner1 RK-PAD Rumble Seat streamliner1 Color Matching Honda CRF250L Sissybar Pads 225 Sissybar Pads 210 hd-box