Hollywood Solo & Pillion for 2008 H-D Street Glide

Hollywood Solo & Pillion for 2008 H-D Street Glide

Help questions

If you would like any further help or have any questions please either email or call

#Conditioner
Saddle Cream®



  • Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application.
    * More Info *


Apparel

Tees, Hats & More




  • We're often asked about tees and such so we caved in and had some Corbin gear made up. This is where you'll * Find It *


Furniture

Barstools & Auto Furniture



  • Ready for a Corbin seat inside your house? Auto styled couches and our classic chrome and leather barstools are a big hit for the man cave!
    * Check 'em Out *

Measurements:
  • Rider Seating: 12" wide x 17.5" long
  • Passenger pillion: 7.5" wide x 10" long
  • Approx seat height: 27"


  • Installs easily using brackets supplied with the saddle. Corbin's mounting system allows for use of our unique key lock system. Once the brackets are installed, the saddle will install and remove with a twist of the key.

  • Designed to work with a variety of backrest and trunk options on your bike. We haven't been able to test all components available (there are probably hundreds), but we have checked the most common Harley-Davidson parts. They are:
    Tall Detachable Sissy Bar #529337A (with HD or Corbin pad)
    Short Detachable Sissy Bar #52935-04 (with HD or Corbin pad)
    Tour Pak Rack #53303-07
    Tour Pak models: #53147-98B, #53018-04A, #53092-05 & #53690-06
    Corbin Streamliner trunk on H-D Tour-Pak rack #53303-07


  • Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel....   don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?



  • Warning: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.



PleaseNote

Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.


Saddle Warranty

Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).


Fiberglass Warranty

Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
A note about paint color matching, Please Read


Export Sales

USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty and applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.


test

Hollywood Solo saddle gives your Street Glide a slick, low profile look while providing you with reasonable, boulevard cruising comfort. Our Fibertech basepan provides a perfect, flowing fit along the tank, chassis and fender, but rides on rubber bumpers to protect your paint job. Naturally, Hollywood Solo is built up with high density Comfort Cell foam to provide a firm resilient ride despite the incredibly low profile. It’s seats like this one that brought Mike to the development of our infinite ratio foam!

Hollywood Solo offers the option of a slim line pillion pad to accommodate passengers. Our pillion installs easily and hides the rear installation point for a very clean look. The extremely low profile looks as cool as a fender bib, but you can take passengers on it.

Hollywood Solo and pillion pad come standard with genuine leather seating. Leather seating is great because it breathes with your body and will break in with the foam shape for a personalized fit. Leather is extremely durable and works great for motorcycle saddles. Over time your saddle will age and develop a unique character just like your leather jacket and chaps do. If you care for it properly with a quality conditioner like our Saddle Cream, your leather saddle will be your riding buddy for many years.

Standard solo and pillion are made with plain black seating and sides for a completely stealthy appearance. If you prefer something that looks a bit more custom, we can provide your saddle with the slick stitch pattern shown on this page. Part tribal and part pinstripe, this stitch adds a very nice look without overpowering your bike visually.

Hollywood Solo is a great setup if you want your Dresser to have a low and slammed look. Our saddle mounts easily and uses our unique key lock system. All required brackets are included for simple mounting.

Designed to work with a variety of backrest and trunk options on your bike. We haven't been able to test all components available (there are probably hundreds), but we have checked the most common Harley-Davidson parts. They are:
Tall Detachable Sissy Bar #529337A (with HD or Corbin pad)
Short Detachable Sissy Bar #52935-04 (with HD or Corbin pad)
Tour Pak Rack #53303-07
Tour Pak models: #53147-98B, #53018-04A, #53092-05 & #53690-06
Corbin Streamliner trunk on H-D Tour-Pak rack #53303-07
Speaking of the Streamliner trunk... This makes a nice, clean addition to your bike while keeping a smooth flowing look. Designed to hold an adult size full face helmet with room to spare. Very convenient for all your traveling needs. Includes sculpted passenger backrest pad in coordinating leather. Get complete information on the Trunk (HERE).

Specs




Unique Technology

The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.




Fibertech™ Basepan

A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more...




Comfort Cell® Foam

The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort!




Ergonomic Shaping

A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.




Patented Manufacturing Technology

Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info




Genuine Leather

We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.


Key Lock Installation

This saddle model uses a new mounting system designed by Corbin to allow installation and removable with a simple key lock. Once the included brackets are installed, the saddle can be removed easily by just inserting and turning the key. Need a Demo ? Just click the button.

Write a review

Note: HTML is not translated!
    Bad           Good

Captcha

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Aliquam iaculis egestas laoreet. Etiam faucibus massa sed risus lacinia in vulputate dolor imperdiet. Curabitur pharetra, purus a commodo dignissim, sapien nulla tempus nisi, et varius nulla urna at arcu.Lorem ipsum dolor sit amet, consectetur adipiscing elit. Aliquam iaculis egestas laoreet. Etiam faucibus massa sed risus lacinia in vulputate dolor imperdiet. Curabitur pharetra, purus a commodo dignissim, sapien nulla tempus nisi, et varius nulla urna at arcuLorem ipsum dolor sit amet, consectetur adipiscing elit. Aliquam iaculis egestas laoreet. Etiam faucibus massa sed risus lacinia in vulputate dolor imperdiet. Curabitur pharetra, purus a commodo dignissim, sapien nulla tempus nisi, et varius nulla urna at arcu. 

  • Views: 271
  • Brand: Harley-Davidson
  • Product Code: HD-FLHX-8-H
  • Availability: 10
  • £0.00
  • Ex Tax: £0.00

Available Options

Tags: Hollywood Solo & Pillion for 2008 H-D Street Glide, HD-FLHX-8-H, 2008 Harley Davidson Road Glide