Gunfighter saddle for 2017-2018 Ducati Supersport

Gunfighter saddle for 2017-2018 Ducati Supersport

Help & Info



     

 


 

- Select the checkbox next to all parts you would like added to your cart. Please be sure to select your cover options, if applicable, before clicking the "Add To Cart" button.

 

- If you would like any further help or have any questions please either email or call

 

- Click for Configurator Help

#Conditioner
Saddle Cream®



  • Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application.
    * More Info *


Apparel

Tees, Hats & More




  • We're often asked about tees and such so we caved in and had some Corbin gear made up. This is where you'll * Find It *


Furniture

Barstools & Auto Furniture



  • Ready for a Corbin seat inside your house? Auto styled couches and our classic chrome and leather barstools are a big hit for the man cave!
    * Check 'em Out *

Measurements:
  • Rider seating: 14" wide x 14" long x 2.5" deep
  • Approx seat height: 32"


  • Corbin saddle installs like stock and integrates with the Ducati key lock.

  • If you plan on using the Ducati seat cowl, please do NOT order a welt on your saddle as this will interfere with cowl fitment.

  • When new, you may wish to put a washer between seat and bracket to ease locking on the bike. Remove these washers once the rubber bumpers have broken in a bit.


  • Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel....   don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?



  • Warning: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.



PleaseNote

Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.


Saddle Warranty

Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).


Fiberglass Warranty

Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
A note about paint color matching, Please Read


Export Sales

USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty and applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.


Comfort and style together in one package! Corbin's Gunfighter model is designed to provide touring quality support for riders who usually ride solo and want to keep a fast look on their Supersport.

Up front the seating area has been ergonomically designed to distribute body weight over a greater area. This provides longer-range support and eliminates hot spots. Neutralized seating platform helps to hold you body in place and curbs sliding in the saddle. This also helps to relieve rider fatigue by taking pressure off your wrists and knees.

Our exclusive Comfort Cell foam material on the inside provides a firm, resilient ride that supports your body indefinitely. Over time, Comfort Cell will break in and adapt to provide a personalized fit to your body.

For a solo look, the Gunfighter tail section is shaped to emulate the lines of the bodywork with a fastback tail section. On the inside, the tail is padded and upholstered to provide for short trip passenger capability. Although the shaping of the tail is designed primarily for looks, the Comfort Cell foam still provides a good perch for your copilot on short to medium length trips. Corbin's Gunfighter saddle works with the Ducati seat cowl.

Bucket shaping of the front seating area gives an unprecedented amount of body support. Notice how it curves up at the back to provide support to your lower back. Towards the front of the bucket we design the saddle narrower to allow for ground reach. Smaller riders may prefer to slide forward and out of the bucket at stop signs for best ground reach.

Our Fibertech base material and patented manufacturing process allows a perfect fit to the lines of the bodywork and tank. This rigid baseplate provides the saddle with a firm foundation to support the carefully designed ergonomics of the foam. The entire seat rides on rubber bumpers to protect your paint job and mounts to your bike with the stock key lock system. Latch bracket comes pre-mounted on the saddle.

On the outside we use genuine leather seating for a luxurious ride that breathes with your body. Leather will break in along with the foam to support the personalized fit. We've designed a cover pattern that allows you to keep a custom, yet subtle look or choose from a variety of colored material options at no extra charge for high visual impact. Shown here with Carbon-Fiber leather seating, Asphalt sides & tail and Red stitching. We do not recommend colored welts on this model as it would interfere with fit of the Ducati seat cowl.


Corbin Italy VersionCorbin now uses this special "Italian Flag" logo on all of the saddles we make for Italian motorcycles. If you prefer the standard Corbin stitch, please specify when ordering.



Specs


Unique Technology

The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.


Fibertech™ Basepan

A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more...


Comfort Cell® Foam

The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort!


Ergonomic Shaping

A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.


Patented Manufacturing Technology

Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info


Genuine Leather

We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.

Write a review

Note: HTML is not translated!
    Bad           Good

Captcha
  • Views: 70
  • Product Code: D-9SS-17-G
  • Availability: 10
  • £0.00
  • Ex Tax: £0.00
    CONFIGURATOR

    Click the "Design It" button to explore. You will be taken to our visual design tool where you can experiment and share it with your friends, add it to your shopping cart or just play around for a bit.

Available Options


Tags: Gunfighter saddle for 2017-2018 Ducati Supersport, D-9SS-17-G,