Gambler saddle for 2008 - 2011 Harley-Davidson Crossbones

Gambler saddle for 2008 - 2011 Harley-Davidson Crossbones

Help & Info



     

 


 

- Select the checkbox next to all parts you would like added to your cart. Please be sure to select your cover options, if applicable, before clicking the "Add To Cart" button.

 

- If you would like any further help or have any questions please either email or call

 

- Click for Configurator Help

#Conditioner
Saddle Cream®



  • Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application.
    * More Info *


Apparel

Tees, Hats & More




  • We're often asked about tees and such so we caved in and had some Corbin gear made up. This is where you'll * Find It *


Furniture

Barstools & Auto Furniture



  • Ready for a Corbin seat inside your house? Auto styled couches and our classic chrome and leather barstools are a big hit for the man cave!
    * Check 'em Out *

Measurements:
  • Rider Seating: Approx. 12" wide x 17.5" long
  • Passenger Seating: Approx. 8" wide x 11.5" long
  • Seat height: 25"


  • Installation: Corbin's Gambler saddle installs a bit different than your stock seat in order to use a new key-lock system. Bracket installation is a one-time deal, then your new saddle will go on and off with the included keys.

  • Start by removing your stock seat and belt strap. Remove the stock 5/16 x 1" bolts that’s securing the oil tank. Install the front bracket using the stock bolts.

  • The seat installs by screwing the supplied latch pin and nylon cap into the rear thread nut of the rear fender. Slide the key way bracket on the seat into the latch pin on the fender and secure the front of the seat by lining the key lock at the front of the seat to the latch pin on the bracket. Push down on the nose of the seat until you hear TWO clicks from the latch.

  • NOTE: To ease installation until the rubber bumper on the basepan break in, it may be necessary to add a washer under the rear nylon cap. This will make it easier to latch.


  • Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel....   don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?



  • Warning: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.



PleaseNote

Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.


Saddle Warranty

Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).


Fiberglass Warranty

Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
A note about paint color matching, Please Read


Export Sales

USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty and applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.


Gambler saddle offers a sleek, flowing appearance and low profile design that has made this design extremely popular for 'round town cruising. Gambler features a comfortable driver's position with a clean pillion seating area providing a flawless profile. Built-up of Comfort Cell® foam that allows a low saddle that retains comfort value. Sculpted seating disperses rider's weight ergonomically and gives you lasting support while still providing good ground reach at stop signs! This is a good choice for riders that often ride solo or have passengers along for short to medium range trips.

All Corbin saddles come standard with genuine leather seating in your choice of textures and colors. We use genuine leather in all of our saddle models now because it provides a perch that will breathe with your body and break in along with the foam shape. All in all, the saddle will conform to your body and provide a personalized fit upon break in. Just be sure to care for your saddle properly with a quality leather conditioner like our Saddle Cream. Your leather saddle will break in gracefully and develop a unique character of its own... just like your leather jacket. The model shown uses all black Mercedes for a very stealthy look.

As with all Corbin saddle designs, we sculpt the rider's area to conform to the shape of the human body. This gives you more square inches of body contact which, in turn, gives better weight distribution. The Corbin saddle eliminates hot spots and increases your riding time... even with such a low profile. Passenger seating area is built mostly to keep a slick look, but the use of our high-density Comfort Cell foam still provides reasonable comfort.

Foam density is an important factor in long range comfort and we always say... "Firm is a good thing". Corbin uses a very unique formula of purpose built materials in the manufacturing process. Combine this with the years of design experience and you have the world's finest motorcycle seat. Comfort Cell® foam combined with our patented molding process deliver unmatched contoured support. Corbin saddles feel firm when you first ride on them, but will break in and adapt to your body and support you in comfort for years to come.

Specs




Unique Technology

The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.




Fibertech™ Basepan

A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more...




Comfort Cell® Foam

The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort!




Ergonomic Shaping

A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.




Patented Manufacturing Technology

Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info




Genuine Leather

We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.


Key Lock Installation

This saddle model uses a new mounting system designed by Corbin to allow installation and removable with a simple key lock. Once the included brackets are installed, the saddle can be removed easily by just inserting and turning the key. Need a Demo ? Just click the button.

Write a review

Note: HTML is not translated!
    Bad           Good

Captcha
  • Views: 66
  • Product Code: HD-ST8-200-GAM
  • Availability: 10
  • £0.00
  • Ex Tax: £0.00

Available Options

Tags: Gambler saddle for 2008 - 2011 Harley-Davidson Crossbones, HD-ST8-200-GAM, 2008-2011 Harley-Davidson Softail models / FLSTSB Cross Bones