Classic Solo Saddle for Yamaha Roadstar

Classic Solo Saddle for Yamaha Roadstar

Help & Info



     

 


 

- Select the checkbox next to all parts you would like added to your cart. Please be sure to select your cover options, if applicable, before clicking the "Add To Cart" button.

 

- If you would like any further help or have any questions please either email or call

 

- Click for Configurator Help

#Conditioner
Saddle Cream®



  • Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application.
    * More Info *


Apparel

Tees, Hats & More




  • We're often asked about tees and such so we caved in and had some Corbin gear made up. This is where you'll * Find It *


Furniture

Barstools & Auto Furniture



  • Ready for a Corbin seat inside your house? Auto styled couches and our classic chrome and leather barstools are a big hit for the man cave!
    * Check 'em Out *




  • When ordering a sissy bar pad for your Yamaha, you can verify the correct fitment using these photos as a guide. There are a few different sissy bar systems available from Yamaha and this is a good way to assure you get the correct part.

  • Compare the bolt pattern of your sissy bar to the bolt pattern shown for each of the pads to assure proper bolt alignment.

  • The #4WM-41 and #YRS-PAD have the same bolt pattern on the rear and same shape to the bar. The big difference between these two is the thickness of the pad. The #YRS-PAD is designed to work with the Royal Star sissy bar that leans further back than the Drag Star model.


  • Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel....   don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?



  • Warning: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.



PleaseNote

Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.


Saddle Warranty

Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).


Fiberglass Warranty

Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
A note about paint color matching, Please Read


Export Sales

USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty and applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.


Corbin's Classic Solo Saddle is designed to provide maximum rider comfort combined with a classy, nostalgic look. Our sculpted seating position gives maximized body contact and provides true touring comfort with a bucket that gives the support you need for long range riding. We've sculpted the rider bucket to relieve centralized pressure and provide support more from the side. Our neutralized seat platform offers an easier reach to the ground and a more correct ergonomic position on the bike. For your copilot we offer a Touring Pillion pad that maximizes the seating width of the rear fender while keeping a low, sly profile or a Standard pillion for good comfort and a more nostalgic line. All components are built up with our high density foam to give your passenger a firm supportive ride mile after mile.
All saddles are richly tailored with genuine leather seating panels and built up with our exclusive Comfort Cell® foam. Choose from a wide range of leather options for a custom touch at no extra charge. Leather will provide a nice perch that breathes with your body and will break in along with the foam shape for a personalized fit to your body. Just be sure to care for your leather saddle with a quality conditioner like our Saddle Cream. With proper care your seat will age gracefully, developing a unique character, and will be your riding buddy for years. Our leather solo saddle & pillions will completely change the look and feel of your new cruiser and are an excellent value. Chrome studs and a tasteful concho provide an added nostalgic touch and are included at no charge if desired.

To complete the package, we offer a coordinated sissy bar pad that bolts up easily to your Yamaha sissy bar. Contoured to fit the shape of your copilot's back and provide excellent ergonomic support. Naturally, the pad comes coordinated to match the look of your Corbin saddle for an integrated look. Built with the same quality materials as your saddle for day long comfort!

Specs



Unique Technology

The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.



Fibertech™ Basepan

A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more...



Comfort Cell® Foam

The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort!



Ergonomic Shaping

A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.



Patented Manufacturing Technology

Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info



Genuine Leather

We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.

Key Lock Installation

This saddle model uses a new mounting system designed by Corbin to allow installation and removable with a simple key lock. Once the included brackets are installed, the saddle can be removed easily by just inserting and turning the key. Need a Demo ? Just click the button.

Write a review

Note: HTML is not translated!
    Bad           Good

Captcha
  • Views: 616
  • Product Code: ROAD-S
  • Availability: 10
  • £0.00
  • Ex Tax: £0.00
    CONFIGURATOR

    Click the "Design It" button to explore. You will be taken to our visual design tool where you can experiment and share it with your friends, add it to your shopping cart or just play around for a bit.

Available Options


Tags: Classic Solo Saddle for Yamaha Roadstar, ROAD-S, 1999 - 2012 Yamaha Road Star