Classic Solo & Pillion Saddle for 2016-2018 Moto Guzzi MGX-21

Classic Solo & Pillion Saddle for 2016-2018 Moto Guzzi MGX-21

Help & Info




- Select the checkbox next to all parts you would like added to your cart. Please be sure to select your cover options, if applicable, before clicking the "Add To Cart" button.


- If you would like any further help or have any questions please either email or call


- Click for Configurator Help

Saddle Cream®

  • Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application.
    * More Info *

Standard Ovalbac®

  • Our most popular backrest model is the perfect blend of form and function. The size looks visually appropriate on most every seat yet is large enough to provide good, sculpted support. Works well in either the rider's or passenger's position. The standard Ovalbac is available with a range of finishing plate options to dress up the rear including chrome!
    * More Info *


Standard Backrest

  • The standard Corbin backrest for years! This model is the same size and shape as the Standard Ovalbac above, but without the hole in the middle. Provides plenty of sculpted back support without looking too big on the bike. Works in both the rider or passenger seating area on virtually all Corbin saddle models. This model also has the option of chrome studs if desired.
    * More Info *

Large Ovalbac®

  • Like the Standard Ovalbac show above, but with a larger contact area for added support. Works great as a passenger backrest in Dual Touring models. Because of the added width, we do not recommend this model in the front position while carrying a passenger... it may interfere with their legs. Sculpted to provide wide ergonomic support. Offers a variety of finishing plate options to customize the rear (sorry, no chrome).
    * More Info *


Tee Ovalbac®

  • This model is specially designed to be used in the large Dual Touring seats (like HD Baggers) or in Master's Type saddles as found on the Goldwings. Sculpted for extended support both vertically and horizontally, but cut away at the bottom to provide clearance for passenger's legs. A variety of finishing plate options are available to customize the rear.
    * More Info *


Gunfighter Ovalbac®

  • If you want the functionality of a backrest, but also want the smallest appearance possible, this is the backrest model for you. This one is most often used as a rider's backrest in Gunfighter seat models (thus the name). Includes a variety of finishing plate options for the rear.
    * More Info *


Gunfighter Backrest®

  • All the functionality of an adjustable backrest, combined with the smallest profile possible. This model is often used as a rider's backrest in Gunfighter seat models just like the #02-G shown above. Includes genuine leather seating and color coordinating options just like our saddles
    * More Info *


Glove Box

  • A convenient storage solution that looks great too. Corbin's Glove Box bolts up easily to your #02-S(B) model backrest in place of the rear finishing plate to provide four liters of locking storage. Available in primer or pre-painted. Some color matches are available depending on bike make and model. Comes fully lined too! * More Info *


Tees, Hats & More

  • We're often asked about tees and such so we caved in and had some Corbin gear made up. This is where you'll * Find It *


Barstools & Auto Furniture

  • Ready for a Corbin seat inside your house? Auto styled couches and our classic chrome and leather barstools are a big hit for the man cave!
    * Check 'em Out *

  • Rider Seating: 16"wide x 18" long x 4" deep
  • Passenger: 12" wide x 11" long

  • Classic Solo installs like stock with brackets already mounted on the saddle. Integrates with your factory key lock.

  • Passenger Pillion installs just like the OEM unit. We include brackets premounted on the seat and re-use the stock bolts for installation.

  • Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel....   don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?

  • Warning: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.


Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.

Saddle Warranty

Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).

Fiberglass Warranty

Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
A note about paint color matching, Please Read

Export Sales

USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty and applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.

Corbin's Classic Solo and Pillion are built up to enhance the comfort value of your Moto-Guzzi and work in conjunction with the OEM seats to provide maximum versatility.

Built on a rigid Fibertech basepan that provides a more precise fit and has the strength to support the carefully designed foam shape. Fibertech also has the strength needed to support Corbin's internal backrest hardware. Our patented manufacturing process provides a mechanical bond between the foam and baseplate to assure a long term supportive foam shape.

We use a unique design principal called Ergonomic Shaping. This means the saddle is shaped like the human body to create more square inches of body contact and better weight distribution. This will eliminate hot spots and provide more support over your entire rear end. When combined with our purpose built Comfort Cell® foam, you'll find a firm supportive ride that allows you to spend all day in the saddle. Near the front of the seat you can see how it was shaped to allow for good ground reach at stop signs.

Both the Solo and Pillion seats work with an optional Corbin backrest for added support. We offer a range of styles to choose from to suit the amount of support desired. Backrests install / remove with a single bolt and adjust to rider posture. Shown above is our Ovalbac model #02-SB which offers a good combination of clean looks with nine inches of vertical back support. You can use a single backrest transferred front to back as needed or get two for full time use.

Our blend of unique materials and craftsmanship provides a component that flows with the bike and looks as good as it works... Corbin delivers maximum value with designer quality appearance! Seat shaping provides a nice flowing look on the bike that matches the Moto-Guzzi styling. On top we've designed a cover pattern in genuine leather for a luxurious ride that looks great. Our neutralized seating platform helps to curb the tendency to slide in the saddle which will help eliminate fatigue over the long haul.

Classic Solo offers the option of electric heated seating for those chilly morning rides. We incorporate a heater unit under the leather seating and a switch on the left side of the saddle (so you can turn it on without taking your hand off the throttle). Just flip the switch and the seat will warm up and maintain temperature automatically. Comes completely preinstalled in the saddle and you only need integrate the included pigtail to your fusebox.

Virtually all Corbin saddles include genuine leather seating for a luxurious ride that breathes with your body. Likewise, leather seating will break in along with the foam shape to provide a personalized fit to your body over time. In the side panels we use a vinyl material to support the foam shape and keep the saddle taught and nice looking for years to come. The model shown here uses Black Grabber seating, Carbon-Fiber sides and a tasteful red stitching to add a nice, custom touch. Naturally the choice of cover materials is yours to make at no extra charge.

A bit more custom... Our Ovalbac backrests have removable finishing plates on the rear so you can customize their look. Our standard plate is a leather look ABS, but we also offer a Carbon-Fiber look or primer for custom painting. For just a bit extra we can provide a plate either prepainted gloss black or in chromed steel.

If you're in the market for a little more storage we have this cool Glovebox that attaches in place of the rear finishing plate. If offers plenty of room for a couple bottles of water and your other small travel essentials like cell phones and (you guessed it) gloves. Corbin glovebox offers four liters of storage and locks to protect your cargo.

Classic Solo installs just like stock and integrates with the factory key lock. Passenger Pillion also installs like stock with mounting bracket preinstalled on the seat. Re-use the stock bolts to secure the Corbin rear seat. If you opt for electric heat in the front seat, all components come installed in the saddle. Simply connect the included wiring pigtail into your fusebox and you're ready to go. Full instructions included.


Unique Technology

The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.

Fibertech™ Basepan

A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more...

Comfort Cell® Foam

The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort!

Ergonomic Shaping

A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.

Patented Manufacturing Technology

Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info

Genuine Leather

We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.

Corbin Backrest System

The first and most versatile removable backrest system available for motorcycles! Corbin's backrests provide added vertical back support and long range comfort. Supported by internal hardware for a very clean look. Backrests adjust to rider's profile for a tailored fit and install or remove easily as desired. A very popular option! Click the button for additional info...

Electric Heat

As an option we can include electric heat in this saddle! This option provides a true bit of luxury for when the temperature starts to drop. Simple to install with major components pre-built into the saddle. Just wire in the included pigtail and you're ready to roll. Click the button at left for complete info...

g! Heater elements should never be installed in motorcycle seats used by riders that cannot sense heat.

Write a review

Note: HTML is not translated!
    Bad           Good

  • Views: 300
  • Product Code: MG-MGX21-S / P
  • Availability: 10
  • £0.00
  • Ex Tax: £0.00

    Click the "Design It" button to explore. You will be taken to our visual design tool where you can experiment and share it with your friends, add it to your shopping cart or just play around for a bit.

Available Options

Tags: Classic Solo & Pillion Saddle for 2016-2018 Moto Guzzi MGX-21, MG-MGX21-S / P, MGX 21