2002-2008 Kawasaki Mean Streak, 2004+ Suzuki Marauder 1600 & Boulevard C90

2002-2008 Kawasaki Mean Streak, 2004+ Suzuki Marauder 1600 & Boulevard C90

Help questions

If you would like any further help or have any questions please either email or call

Design IT

Click the "Design It" . This is a sample of the configurators available so you can play around and get ideas. Please do not use for ordering purposes... 

#Conditioner
Saddle Cream®



  • Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application.
    * More Info *


Apparel

Tees, Hats & More




  • We're often asked about tees and such so we caved in and had some Corbin gear made up. This is where you'll * Find It *


Furniture

Barstools & Auto Furniture



  • Ready for a Corbin seat inside your house? Auto styled couches and our classic chrome and leather barstools are a big hit for the man cave!
    * Check 'em Out *

Measurements:
  • Rider seating: Rider Seating: Approx. 14" wide x 18" long
  • Back support: 8"
  • Passenger: Approx. 8" wide x 9" long
  • Back support: 9"


  • Rumble seat installs on your bike easily with all brackets and necessary components included. Install the Corbin latch pin into your fender and slide the nose of the saddle into place with the standard tongue into the chassis. Then lower the rear of the saddle into place and latch by pushing down on saddle.
  • Rumble seat has not been tested to work with any sissy bar or other passenger backrest assembly available for your Mean Streak or Marauder.


  • Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel....   don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?



  • Warning: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.



PleaseNote

Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.


Saddle Warranty

Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).


Fiberglass Warranty

Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
A note about paint color matching, Please Read


Export Sales

USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty and applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.


By popular demand, we have re-engineered our patented Rumble Seat design that offers you the best of both worlds... Slick solo looks and passenger capability with a flip of the wrist. Convenient and easy to use, this seat design features an all-new hinge mechanism that secures the passenger fold down backrest in either position effortlessly. Just fold it up or down and you're ready to roll in style. The saddle looks great in either position and is finished in your choice of styles for a totally custom look.

For solo cruising, the passenger rest provides a slick look similar to our original Gunfighter saddle design. When you wish to carry passengers, just fold up the rear pad to reveal a generous passenger seating area complete with backrest. Of course the passenger seat and backrest pad are constructed with our exclusive Comfort Cell® foam to give excellent support and riding range. This is the most versatile seat design available for your cruiser. On the back of the Rumble Seat, we finish it of with gloss black ABS panels that you can easily remove and take to your favorite painter if you want something a bit more custom.

The Rumble Seat is designed for excellent rider comfort up front and is also built up of our exclusive Comfort Cell® foam. Our foam material feels firm when you first ride it, but this firmness is what gives you the ability to ride great distances in comfort... long lasting support! The front seating area is ergonomically contoured to provide a larger area of body contact and excellent weight distribution. The fold down passenger rest adds extra seat height to give you additional back support and longer riding range. Passenger seating is generous and perfect for short to mid-range rides with the backrest in the flipped up position.

The saddle is designed to fit perfectly to the tank, chassis and fender. This kind of fit is available only in genuine Corbin saddles. For simple installation, we've designed this model to work with our new key lock system. Simply install the included stainless steel latch pin into the seat bolt location on your fender. The seat will now install with a tongue in the front and a key latch in the rear for simple on and off.

Rumble Seat features genuine leather seating for a perch that breathes with your body and breaks in with the foam shape. Saddle comes standard with our "sharp deco" stitch pattern as shown. Choose from a variety of leather styles to customize the look of the saddle. In the side panels and tail, we use a coordinating vinyl to keep your foam shape tight and the saddle looking sharp longer. Leather makes an excellent cover for a motorcycle seat because it is extremely durable and luxurious to ride on. As your saddle ages, the leather will take on its own unique character just like your leather jacket does. Just be sure to care for your new saddle properly with a quality leather conditioner like our Saddle Cream.
Specs




Unique Technology

The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.




Fibertech™ Basepan

A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more...




Comfort Cell® Foam

The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort!




Ergonomic Shaping

A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.




Patented Manufacturing Technology

Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info




Genuine Leather

We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.



Corbin Backrest System

The first and most versatile removable backrest system available for motorcycles! Corbin's backrests provide added vertical back support and long range comfort. Supported by internal hardware for a very clean look. Backrests adjust to rider's profile for a tailored fit and install or remove easily as desired. A very popular option! Click the button for additional info...




Patented Rumble Seat

The first and most versatile removable backrest system available for motorcycles! Corbin's backrests provide added vertical back support and long range comfort. Supported by internal hardware for a very clean look. Backrests adjust to rider's profile for a tailored fit and install or remove easily as desired. A very popular option! Click the button for additional info...




Key Lock Installation

This saddle model uses a new mounting system designed by Corbin to allow installation and removable with a simple key lock. Once the included brackets are installed, the saddle can be removed easily by just inserting and turning the key. Need a Demo ? Just click the button.


Warning!
Heater elements should never be installed in motorcycle seats used by riders that cannot sense heat.

Write a review

Note: HTML is not translated!
    Bad           Good

Captcha

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Aliquam iaculis egestas laoreet. Etiam faucibus massa sed risus lacinia in vulputate dolor imperdiet. Curabitur pharetra, purus a commodo dignissim, sapien nulla tempus nisi, et varius nulla urna at arcu.Lorem ipsum dolor sit amet, consectetur adipiscing elit. Aliquam iaculis egestas laoreet. Etiam faucibus massa sed risus lacinia in vulputate dolor imperdiet. Curabitur pharetra, purus a commodo dignissim, sapien nulla tempus nisi, et varius nulla urna at arcuLorem ipsum dolor sit amet, consectetur adipiscing elit. Aliquam iaculis egestas laoreet. Etiam faucibus massa sed risus lacinia in vulputate dolor imperdiet. Curabitur pharetra, purus a commodo dignissim, sapien nulla tempus nisi, et varius nulla urna at arcu. 

  • Views: 210
  • Brand: Suzuki
  • Product Code: K-MS-FLIP
  • Availability: In Stock
  • £0.00
  • Ex Tax: £0.00

Available Options

Tags: 2002-2008 Kawasaki Mean Streak, 2004+ Suzuki Marauder 1600 & Boulevard C90, K-MS-FLIP, 2002 - 2004 Vulcan Mean Streak